KymcoForum.com
Scooters - Big Bore => Xciting 500 => Topic started by: sjb9989 on May 29, 2015, 12:46:26 AM
-
Does any one know the axle nut size, for removal. Thought it was a 24mm socket...but it was wrong size.
Had a flat tire...closest dealer 20-25miles away.
-
It's 27 MM. Buy a product called (Ride On). it's a tire sealer and balancer. Much better than slime, will not dry out, and much smoother out on the open road. I have never had a flat with it! :-* P.S. This is the same size socket as the large nut on the variator. I would buy an impact version, buy a cheap electric impact wrench from harbor frieght or else where, and change your own belts, rollers etc. :-* Good luck. ;D :-*