KymcoForum.com
General => Technical | How To => Topic started by: 0BARK4322 on June 01, 2010, 12:01:31 AM
-
1-OPEN TOOL BOX
2-RE-MOVE THE TWO SCREWS IN THE TOOL BOX THEN LIFT BOX OUT
3-PULL UP THE CDI UNIT
4-PULL APART THE WIRE AT THE CLAMPS--NOW YOU ARE FINISH
5-PUT BACK IN REVERSE :D
-
..see now, that's what this forum is all about...
..props to OBARK!!!
..you should copy all this to the S9 board OB....
;D
-
WILL DO-------THANKS