KymcoForum.com
General => Technical | How To => Topic started by: Chris0381 on April 20, 2016, 01:01:14 PM
-
I like the thought of this performance mod but boy I should hold off until getting some feedback.
What it entails it using a Ford ignition coil p/n XW4U-12A366-BB XW4U-BB $6 on ebay (just search the p/n).
You trim the rubber boot on the Ford Coil and use a bracket to hold it onto the Kymco Plug.
Since the coil is a basic 2 wire coil, you simply get the Ford wiring or make a simple connector and replace the Kymco coil.
According to this thread, it gives a dramatic performance boost.
http://49ccscoot.proboards.com/thread/11637/looking-get-performance-edge-mod (http://49ccscoot.proboards.com/thread/11637/looking-get-performance-edge-mod)
I have mixed feelings, but for the price and the fact others have done it with no harm, it may be worth a try.
-
Interesting. I'm going to give it a try.
-
the people on there who have done it and say it works are people that generally know what they're talking about over there I've been thinking of trying it myself.
-
I don't believe it! The stock coil is OK just as it is, and a hotter spark won't make your 50cc perform any different. You can get it to go faster just by skipping breakfast :-)
-
I don't believe it! The stock coil is OK just as it is, and a hotter spark won't make your 50cc perform any different. You can get it to go faster just by skipping breakfast :-)
Finally, someone with a dose of reality. Once your mixture is ignited, it's ignited, you're done.
-
the mod provides a more powerful consistent spark to the plug I'm a member on both forums and the guys over there that are giving positive comments on this mod are people with alot more experience than most in the community as a whole. This mod would be most helpful with 2T engines or in replacing Chinese parts.
-
Also it's not like they're saying its a HP increase or anything but very noticable in starting especially on cold starts.