KymcoForum.com

General => General Discussion => Topic started by: Jim Grant on September 19, 2017, 05:32:32 PM

Title: Need help thank you
Post by: Jim Grant on September 19, 2017, 05:32:32 PM

 I'm about to give up nobody responds where can I find a CDI box for that's

Title: Re: Need help thank you
Post by: eamartin on September 19, 2017, 07:24:42 PM

I have read your other posts and you refer to both a ZR50 and a ZX50.  I'm not familiar with either of these models.  In fact, I cannot  find the ZR50 in any parts suppliers listings.  Do you have a ZX50? 

Title: Re: Need help thank you
Post by: Jim Grant on September 19, 2017, 07:30:23 PM

Thanks for replying and sorry for the mix up, let me start over 2003 zx50 super fever cdi box thank you

Title: Re: Need help thank you
Post by: souzamoto on September 19, 2017, 08:19:22 PM

30400-KXCX-J10
UNIT COMP CDI & SPEED CONTROL

This should be the part number you need. I would contact any kymco dealer for help. Number should be good worldwide

CJS

Title: Re: Need help thank you
Post by: eamartin on September 19, 2017, 11:51:27 PM

http://www.kymcopartsmonster.com/pages/OemParts?aribrand=KYM#/Kymco_USA/SC10AS_ZX50/Battery/2K01120005/01120047 (http://www.kymcopartsmonster.com/pages/OemParts?aribrand=KYM#/Kymco_USA/SC10AS_ZX50/Battery/2K01120005/01120047)

I cannot send a photo since I don't have a zx50.  But if you go to the above site, the exploded view shows a # 225.  This is the CDI.  They are sometimes 1/2" x 1" x 2-1/2 " with terminals sticking out one side.  Good luck.  That's the best I can do.   

Title: Re: Need help thank you
Post by: blue on September 20, 2017, 10:55:48 AM

I beleave the zx50 takes the same cdi as the agilty 50. But double check befor buying.

Title: Re: Need help thank you
Post by: eamartin on September 20, 2017, 01:25:47 PM

Is there a 2-stroke Agility 50?

Title: Re: Need help thank you
Post by: Jim Grant on September 21, 2017, 10:28:19 PM

Thanks guys
I got the cdi box off eBay but it looks like I have to buy a entire harness in order to get the plug in...suggestions??

Title: Re: Need help thank you
Post by: eamartin on September 21, 2017, 11:17:42 PM

Quote from: Jim Grant on September 21, 2017, 10:28:19 PM

Thanks guys
I got the cdi box off eBay but it looks like I have to buy a entire harness in order to get the plug in...

Can you share the link to the cdi you bought? Why do you need to buy a harness? 

Title: Re: Need help thank you
Post by: Jim Grant on September 22, 2017, 12:09:54 AM

Quote from: eamartin on September 21, 2017, 11:17:42 PM

Can you share the link to the cdi you bought? Why do you need to buy a harness?

Can someone or does anyone know which wire goes to what pin?
thanks