KymcoForum.com

Scooters - Big Bore => Xciting 500 => Topic started by: Zurg1960 on June 23, 2018, 06:21:23 AM

Title: Clutch nut size
Post by: Zurg1960 on June 23, 2018, 06:21:23 AM

Could somebody please tell which is the size of the big nut which holds the clutch together?

Title: Re: Clutch nut size
Post by: Stig / Major Tom on June 23, 2018, 11:56:44 AM

Some people use a large crescent wrench. Hold the clutch in your hands with the wrench on that nut, and tap the wrench handle on the ground. Pops loose the nut. Then feet on the clutch to keep pressure, and remove the nut.
Stig

Title: Re: Clutch nut size
Post by: xsel777 on June 23, 2018, 01:02:52 PM

As Stig says.

Title: Re: Clutch nut size
Post by: Zurg1960 on June 23, 2018, 02:35:40 PM

Thanks for info!

But the *size* of the wrench?

Title: Re: Clutch nut size
Post by: xsel777 on June 23, 2018, 09:56:36 PM

I went and bought one off gumtree. It is as long as my arm.(60cm) Currently it is locked in the cellar, so I unfortunately cant tell you the jaw size.

Sent from my Mi Max using Tapatalk

Title: Re: Clutch nut size
Post by: xsel777 on June 23, 2018, 09:58:06 PM

I remember I was first trying to find a socket that size, and 48mm is bouncing around at the back of my mind.

Sent from my Mi Max using Tapatalk