KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: Footsoldier2008 on May 22, 2020, 03:23:19 PM

Title: rear suspension removal
Post by: Footsoldier2008 on May 22, 2020, 03:23:19 PM

hi does anyone know how to remove the rear suspension on a agility 125 ?
Many thanks

Title: Re: rear suspension removal
Post by: big blue on May 22, 2020, 04:56:02 PM

Free service manual available here...https://www.manualslib.com/manual/393386/Kymco-Agility-125.html (https://www.manualslib.com/manual/393386/Kymco-Agility-125.html)

Title: Re: rear suspension removal
Post by: TBR125 on May 22, 2020, 06:38:03 PM

Here is the way I did it. There are probably faster methods if you are proficient in plastic body removal.

1.   Place bike onto center-stand and set a block under the rear wheel to take the weight off the strut.
2.   Remove clamp bolt at the strut base and pull out blocks.
3.   Spend 2 hours with a ratcheting wrench removing the upper bolt with .5mm strokes; Or find a way to pull the plastic cover panel and use a ratchet.

Would be glad to hear how it goes. Good luck.