KymcoForum.com

Motorcycles => Venox 250 => Topic started by: Ironhorsecustomz81 on March 01, 2021, 02:29:35 AM

Title: CARBURETOR HELP PLEASE!!!!
Post by: Ironhorsecustomz81 on March 01, 2021, 02:29:35 AM

So I am pretty knowledgeable when it comes to mechanic work but I'll be damned if the Venox 250 carbs are just a pain in the ass. The service manual doesn't tell you where to measure from for float height. Just got it from a friend and it wont start. It sat for 2 years and when I got the carbs off one was was full of junk. So I cleaned em up real good and before i put the floats back in Id like to know how the hell to adjust the floats and tune the carbs. Like I said the manual is sh**.

Title: Re: CARBURETOR HELP PLEASE!!!!
Post by: Stig / Major Tom on March 02, 2021, 11:46:55 PM

What service manual are you using?

Stig

and WELCOME! to the forum

Title: Re: CARBURETOR HELP PLEASE!!!!
Post by: Iahawk on May 06, 2021, 01:09:23 PM

I've always gone with making sure the float is parallel with the carb body when there is no factory info available. That's usually a good place to start.

Title: Re: CARBURETOR HELP PLEASE!!!!
Post by: cobiecat on May 07, 2021, 09:52:08 AM

This table lists the carb float heights for the Venox 250.