KymcoForum.com
Scooters - 125 to 300 => Downtown 300 => Topic started by: Kymco Symco on April 04, 2023, 05:57:40 PM
-
Hi
first post here. i've bought a cheap tatty 2012 downtown 300 i. it needs tidying up in places and various bits fixing/replacing
as i'm learning my way around the scooter.....under the seat. i wonder if anyone can tell me whats missing from here ?
first pic is rear of bike on l/h side
2nd is near side stand cut out block
thanks
(https://i.ibb.co/n3hQYNt/IMG-4538.jpg) (https://ibb.co/s5LsNdz)
(https://i.ibb.co/LtP397v/IMG-4539.jpg) (https://ibb.co/MVhmP09)
-
@xwelder welcome here!
Pls see link and diagram/pics
https://www.manualslib.com/products/Kymco-Downtown-300i-Abs-8827007.html
There should be a wiring diagram. Follow colors there and here we go.
-
@xwelder welcome here!
Pls see link
https://www.manualslib.com/products/Kymco-Downtown-300i-Abs-8827007.html
There should be a wiring diagram. Follow colors there and here we go.
thanks......still looking thru everything for the loom
-
Bottom picture is side stand switch connectors. Bet the side stand switch is missing. The plug with green and yellow plugs into the socket with two greens if those are near the side stand. Fix the splices first then plug together.
Needless to say this bike won't start unless another jury rig has been made elsewhere....
-
First pic looks like the plug for the diagnosis device. Hangs under the small cover at the end of the underseat tray.
Art
-
First photo is the 3 pin diagnostic connector, it hangs from a clip on the rear of the seat tub.
Second photo is the side stand switch bypass. You can plug them into each other so the bike can run with the side stand down. Here's what it should look like when working.
https://www.kymcoforum.com/index.php?action=dlattach;topic=26124.0;attach=16072;image
-
thanks for all the help with this question . much appreciated
i'm using the quote feature here as theres no option to post a reply only this message " An Error Has Occurred!
Call to undefined function split()
-
thanks for all the help with this question . much appreciated
i'm using the quote feature here as theres no option to post a reply only this message " An Error Has Occurred!
Call to undefined function split()
You must not be holding your mouth right if this quote and message works!
-
i'm using the quote feature here as theres no option to post a reply only this message " An Error Has Occurred!
Call to undefined function split()
you can just do a reply without quote if you go up top and hit the 'reply' button
-
thanks.....didn't think to check the top of the page . didn't see reply then that error message and 2 + 2 = 6 :)
-
Hi
currently refurbing the brake calipers....does anyone know the part numbers for the front brake caliper seals ? the dust & main seal
found the rear on line but can't find the front
thanks
-
Should be those pieces... pls see pics
-
Should be those pieces... pls see pics
thanks....have you a link to where you found this ? or the full part numbers for the seals
-
Sitting here in EU/Italy I just send my dealer those numbers with vehicle ID and pick it up couple of days later.
-
Sitting here in EU/Italy I just send my dealer those numbers with vehicle ID and pick it up couple of days later.
i did some searches and the partial part numbers bring up nothing sadly
-
Here are some aftermarket pads that will fit your 2012 Downtown 300. https://scooterpartsco.com/index.php?main_page=product_info&cPath=120_3522&products_id=690 You can cross reference from the list of what these pads fit.
Art
-
Here are some aftermarket pads that will fit your 2012 Downtown 300. https://scooterpartsco.com/index.php?main_page=product_info&cPath=120_3522&products_id=690 You can cross reference from the list of what these pads fit.
Art
thanks but i'm not looking for pads...i'm looking at the piston caliper dust & main seal
-
Maybe this. https://www.motor-x.com/oem/kymco,downtown-300 Went back and got the right scoot. And in the parts for the front wheel, No piston brake seal shown. But they do list lip seal package. Kymco 90754-LLJ3-E00.
Art
-
Maybe this. https://www.motor-x.com/oem/kymco,downtown-300 Went back and got the right scoot. And in the parts for the front wheel, No piston brake seal shown. But they do list lip seal package. Kymco 90754-LLJ3-E00.
Art
thanks....a search for that lip seal finds it as a dust seal....strange how the seals are correctly listed
-
From continent to continent a little bit different
..start with that one for the whole caliper, then rep kit..
45200-LEA7-E01-NEAKY-426442
-
From continent to continent a little bit different
..start with that one for the whole caliper, then rep kit..
45200-LEA7-E01-NEAKY-426442
thanks...i will stop looking for now & buy a generic kit for same sized pistons and see if that fits
-
I've been looking around at rollers & sliders
anyone in the UL got any links to either they have bought & found to be good
thanks