KymcoForum.com

General => Technical | How To => Topic started by: GoVanGo on June 13, 2023, 04:17:09 AM

Title: Is there anything supposed to be in this hole on the carb?
Post by: GoVanGo on June 13, 2023, 04:17:09 AM

Sorry if this is wrong forum for this but I need a quick answer thanks.
The hole dark area to the right of the brass metal part is that supposed to have something?
Is that the mixture screw spot?
I looked at exploded diagrams but they make no sense to me .


Just is that were an idle mixture screw supposed to go?  My carb has nothing there and I been having idle issues.
thanks

Title: Re: Is there anything supposed to be in this hole on the carb?
Post by: Ruffus on June 13, 2023, 09:29:33 AM

Hard to see whether is a tread in there  and a needle seat. If yes, then an idle screw most likely missing.

Title: Re: Is there anything supposed to be in this hole on the carb?
Post by: GoVanGo on June 14, 2023, 03:23:43 AM

Quote from: Ruffus on June 13, 2023, 09:29:33 AM

Hard to see whether is a tread in there  and a needle seat. If yes, then an idle screw most likely missing.

Yep was a thread there and it was missing that screw and that solved why my scooter was dying at idle. How it went missing I dont know but I know it was when I was running in the back roads and going over hills and valleys. 

Well all good now , they run better when they have that mixture screw in :)

Title: Re: Is there anything supposed to be in this hole on the carb?
Post by: Ruffus on June 14, 2023, 08:29:48 AM

Good to read this easy fix. And YES they behave way civil with all parts on it. 😂