KymcoForum.com
Scooters - Big Bore => Xciting 500 => Topic started by: devrongrimm on May 15, 2024, 01:48:28 AM
-
Has anyone experienced this kind of problem with your unit?
When coming from a full stop and then you start to run your scooter it is having a hard time in accelerating.
From 0 - 20 or sometimes 30 kph it so slow, like something pulling it back. But once you're moving about 40 kph there's no problem from reaching 150+ kph.
It is just from the full stop acceleration.
I hope someone could share there experience with me if ever they've encountered the same problem.
-
Miles on your scooter?
Miles since last CVT servicing?
Stig
-
@devrongrimm welcome here!
First measures in this case should be:
-scoot on mainstand
-brakes pulled and released (stationary brake too)
-try to move rearwheel by hand
-rotates freely, YES/NO
-if NO your rear brakecylinder/disc or hand brake
needs to be revised
-if YES, take off all CVT covers (3) and check whether all moves there properly
-rear alu cover with inserted support bearing stucks sometimes and is hard to remove.
-
Miles on your scooter?
Miles since last CVT servicing?
Stig
Haven't done any CVT servicing yet. But the miles is almost at 10k so it is scheduled for PMS. I would have it checked there since you mention it. I'll update here if the problem has gets fixed.
-
@devrongrimm welcome here!
First measures in this case should be:
-scoot on mainstand
-brakes pulled and released (stationary brake too)
-try to move rearwheel by hand
-rotates freely, YES/NO
-if NO your rear brakecylinder/disc or hand brake
needs to be revised
-if YES, take off all CVT covers (3) and check whether all moves there properly
-rear alu cover with inserted support bearing stucks sometimes and is hard to remove.
Okay, I'll do this and check the things you mentioned. I'll update once I've checked it.