KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: clitheroeguy on March 27, 2011, 06:52:12 PM

Title: headlight low beam dont work
Post by: clitheroeguy on March 27, 2011, 06:52:12 PM

 >:(

2005 model
just checked the lights and low beam doesnt work but high beam does and all other lights work aswell

what could be wrong

only thing i can guess which i going to try tomorrow is

check connection and if same then change bulb and if same my last option is changing fuse and check wires

but if they all fail im guessing my switch is knacked

anyone had this problem before

Title: re: looking for help, please! having bogging issues with zx50
Post by: sidthesloth on March 27, 2011, 08:21:01 PM

Does it have high and low beam? A lot of 50cc scoots don't have high beam. It would more than likely be the bulb.

Title: Re: headlight low beam dont work
Post by: clitheroeguy on March 28, 2011, 04:37:16 AM

well when i use right side switch side lights work if i click on full theres nothing and if i press left side switch high beam or passing they both work but i dont want to be pulled leaving it on full beam and most likly will burn out the bulb faster

is there a chance the right side switch faulty if the left side passing switch works as that uses it as a low beam doesnt it

Title: Re: headlight low beam dont work
Post by: clitheroeguy on March 28, 2011, 08:00:27 AM

just took the headlight out but problem the lens wouldnt budge its like held on by sealent could i use a hairdryer would that not work

Title: Re: headlight low beam dont work
Post by: sidthesloth on March 28, 2011, 08:34:23 AM

You shouldn't have to remove the lens, the globe goes in from behind, just remove the spring clip and the globe comes out.

Title: Re: headlight low beam dont work
Post by: clitheroeguy on March 28, 2011, 10:15:41 AM

yep done it working now thank god