KymcoForum.com
Scooters - 125 to 300 => People 250 => Topic started by: luckydog on May 31, 2012, 12:57:27 AM
-
have to replace it.
anyone done this already??
can you replace thwe whole pump insead of rebuilding it.
thanks in advance
-
Stadium Yamaha... The whole pump is sold as a unit. (or you can just buy the wear parts, and new shaft)
-
Thank you !!!!!!!!!!!!!!!
-
Any time!!!!!!!!!!!!!!!
-
Hello again
Found the pmp is working, Something is telling the fan to turn on at ignition. Must be a relay or sensor. Any help??
thanks
-
Well if it is relay controlled it is either a sticking relay or bad sender. Find the temp sender, and disconnect it. That should stop the fan unless the relay is stuck closed. I would replace the OEM relay with a Bosch anyway. They are cheaper, and available everywhere.
http://www.google.com/products/catalog?client=opera&rls=en&q=bosch+30a+relay&oe=utf-8&channel=suggest&um=1&ie=UTF-8&tbm=shop&cid=5981072858508301476&sa=X&ei=DUzJT9SpNYWE8ATjo534Dg&ved=0CKMBEPMCMAE (http://www.google.com/products/catalog?client=opera&rls=en&q=bosch+30a+relay&oe=utf-8&channel=suggest&um=1&ie=UTF-8&tbm=shop&cid=5981072858508301476&sa=X&ei=DUzJT9SpNYWE8ATjo534Dg&ved=0CKMBEPMCMAE)
-
Zobie
where is the sender??
I am trying to locate the wires with no luck.
Am looking for a diagram.Someone must have doctored this.
thanks again for your help
-
i think we found it.page 12-14 and 12-15 in the manual.
thanks again
-
I've never worked on an S9 but I would imagine the sender would be mounted in the head. I think there should actually be two of them. One to control the fan, and one to send the temp to the dash gauge.
-
Well if it is relay controlled it is either a sticking relay or bad sender. Find the temp sender, and disconnect it. That should stop the fan unless the relay is stuck closed. I would replace the OEM relay with a Bosch anyway. They are cheaper, and available everywhere.
http://www.google.com/products/catalog?client=opera&rls=en&q=bosch+30a+relay&oe=utf-8&channel=suggest&um=1&ie=UTF-8&tbm=shop&cid=5981072858508301476&sa=X&ei=DUzJT9SpNYWE8ATjo534Dg&ved=0CKMBEPMCMAE (http://www.google.com/products/catalog?client=opera&rls=en&q=bosch+30a+relay&oe=utf-8&channel=suggest&um=1&ie=UTF-8&tbm=shop&cid=5981072858508301476&sa=X&ei=DUzJT9SpNYWE8ATjo534Dg&ved=0CKMBEPMCMAE)
Hi Zombie I read your all post and also visit your website. You have given fantastic information about 250 people waer pump. I absolutely agree with you about sticking relay or bad sender.
-
It has to be one or the other.
Not my site either... There would be party girls all over this jammy if it were ;D ;)
-
Like these!
(http://i1208.photobucket.com/albums/cc375/sapomma/party-hard-girls.jpg)
-
have to replace it.
anyone done this already??
can you replace thwe whole pump insead of rebuilding it.
thanks in advance
No advice from my side, but please share with us how did you realize it has to be replaced and how many kms your scoot has?
Thanks.
-
Like these!
(http://i1208.photobucket.com/albums/cc375/sapomma/party-hard-girls.jpg)
You got it! I love a girl with TWO lazy eyes.... Sexy!