KymcoForum.com

The bystarter is more than likely fine as it is a brand new carburetor. It does have compression, do not have a compression tester but seems to have some resistance when I manually kick start it. Assuming that I would need to dismantle the head to check valve clearance, I have not checked that. Not sure how to check the timing but will do a little research. Other things that I doubled checked to no avail:

ON/Off switch
Pulled spark plug and checked for spark
Pulled air filter assembly to see if there was any blockage
tried to spray some starting fluid

Would a disconnected vacuum line/hose cause it to not run? I have a hose coming off of what the Kymco parts diagram is calling air filter 2

I tried the switch in both positions and it has a slightly different sound when in "Run" position, almost like it wants to fire. Not familiar with the auto bystarter but will research it. It currently has just under 6,800 miles. I am the second owner and it ran up until a month ago, no issues prior to this. The fuel is being pumped when I push the starter button
Thank you for the suggestions!