1
Agility 50 / Re: CDI cut or race CDI?
« on: June 27, 2011, 01:37:04 PM »
Anyone tried these race cdi ? Any gain in Km/t? 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Agility 50 / Cold Start problem, FIXED!
« on: June 23, 2011, 12:36:15 PM »
Just change the Idle jet from 35 -> 45 on the carburettor
Type: Keihin CVK FCR PWK PE PD PWM PJ pilot jets N424-21 #45
Type: Keihin CVK FCR PWK PE PD PWM PJ pilot jets N424-21 #45
3
Agility 50 / Re: Performance Exhaust to Agility 4-T
« on: May 03, 2011, 02:15:37 PM »
hehe, goody 
Not so suprised for that answer, but i had to ask!
Not so suprised for that answer, but i had to ask!
4
Agility 50 / Performance Exhaust to Agility 4-T
« on: May 03, 2011, 10:12:43 AM »
Does anybody have experience with performance Exhaust on this bikes? -08 model
Thinking of this SILENT PRO type;
http://www.tecnigas.com/o/cerca.php?marca=16&models=359&idioma=en&tria_tub=Go
Thinking of this SILENT PRO type;
http://www.tecnigas.com/o/cerca.php?marca=16&models=359&idioma=en&tria_tub=Go
5
Agility 50 / Re: Problem when the scooter gets warm
« on: May 02, 2011, 01:20:13 PM »
yes, will check! 
6
Agility 50 / Re: Problem when the scooter gets warm
« on: April 27, 2011, 02:44:47 PM »
my philosophy is that i`am flooding the carburettor somehow....and then it`s stops...
Loomin (have tried #88 main jet as well)
Loomin (have tried #88 main jet as well)
7
Agility 50 / Problem when the scooter gets warm
« on: April 27, 2011, 11:32:11 AM »
I got a Agility-08 4-stroke 50cc with a 84 main jet and K&N Air Filter, CDI cut and new busher.
After riding for some miles it starts to slow down and if i give it gas then choking.... i have tried to tune the gas/ratio screw but no luck...
The i have to try start it againg 6-7 tryes, then it goes on idle, then i can drive again...
Is the 84 main jet to rich?!?
After riding for some miles it starts to slow down and if i give it gas then choking.... i have tried to tune the gas/ratio screw but no luck...
The i have to try start it againg 6-7 tryes, then it goes on idle, then i can drive again...
Is the 84 main jet to rich?!?
8
Agility 50 / Re: My Kymco Agility 2008 - From frustration to pure joy! :)
« on: March 14, 2011, 02:41:12 PM »
Yes, but I considering to change it to K&N filter....maybe you have any experience with this?
9
Agility 50 / My Kymco Agility 2008 - From frustration to pure joy! :)
« on: March 14, 2011, 08:18:57 AM »
Since i have used this forum a lot, i want to share my story to give something back 
I bougt a used Agility -08 here in Norway and the day i bought it was -1 and snow.
When i asked this private seller if it was quick/good to start he said yes, and when i pushed the button....it started.
But of course the seller had warmed it up before i came to visit him, so no problem to start at all.... so next time i will feel the muffler if it`s warm
But anyway, bought it and drove it 25 km to the ferry to my island. I had to wait about 25 min for the ferry and then when i tryed to start it up again no luck....
So i just rolled my scooter to the ferry, i was just thinking that i forgot to turn on the choke or something (did`nt know so much, a scooter is just a scooter right?
Then when the ferry almost had arrived my island, i tryed again, started up 5 min before and it started....but no power.... so i rolled the scooter to shore...quite embarrassing, since people at the ferry had talked about how nice and good looking the scooter was
So now i got a scooter that is no use for me, happy times!
I started to read in this forum, then i started to understand a little more about this little machine of a scooter.
First i changed the spark plug to a NGK C7HSA (original Champion something), then the fuel-filter, main jet (from 80 to 86), changed the boss variator and weight to 4.7 g. I adjusted the carburettor also, because the previous owner had fumbled with it.
So now the scooter takes about 1 min to fire up and it goes about 70 km/t!!! Happy times!
I bougt a used Agility -08 here in Norway and the day i bought it was -1 and snow.
When i asked this private seller if it was quick/good to start he said yes, and when i pushed the button....it started.
But of course the seller had warmed it up before i came to visit him, so no problem to start at all.... so next time i will feel the muffler if it`s warm
But anyway, bought it and drove it 25 km to the ferry to my island. I had to wait about 25 min for the ferry and then when i tryed to start it up again no luck....
So i just rolled my scooter to the ferry, i was just thinking that i forgot to turn on the choke or something (did`nt know so much, a scooter is just a scooter right?
Then when the ferry almost had arrived my island, i tryed again, started up 5 min before and it started....but no power.... so i rolled the scooter to shore...quite embarrassing, since people at the ferry had talked about how nice and good looking the scooter was
So now i got a scooter that is no use for me, happy times!
I started to read in this forum, then i started to understand a little more about this little machine of a scooter.
First i changed the spark plug to a NGK C7HSA (original Champion something), then the fuel-filter, main jet (from 80 to 86), changed the boss variator and weight to 4.7 g. I adjusted the carburettor also, because the previous owner had fumbled with it.
So now the scooter takes about 1 min to fire up and it goes about 70 km/t!!! Happy times!
10
Agility 50 / Re: CDI Cut and Fuel indicator
« on: March 13, 2011, 03:04:36 PM »
Fixed, nothing to do with the cdi cut, i filled full tank and the float mechanism was stuck... Just bad luck, hehe
11
Agility 50 / CDI Cut and Fuel indicator
« on: March 12, 2011, 09:35:29 PM »
I just cut the cdi wire and i dont now but, now the fuel indicator is showing empty all the time. When i turn the key on, then the fuel indicator should move to full, but no luck.... Does anybody know what might be wrong? I tryed to connect the wire againg just to see if have something with the cdi wire....Looked for loose connections and things like that, but no... any other suggestions? 
12
Agility 50 / Re: Cold Start problem, 5 min / How to fix ?
« on: March 12, 2011, 09:30:08 PM »
Changed the main jet from 80 -> 86 and changed the spark plug, now it`s much better!
13
Agility 50 / Re: Cold Start problem, 5 min / How to fix ?
« on: March 08, 2011, 07:35:53 AM »
So people that have bougt a brand new Agility also have problems with cold weather (0 to +5 *C)?
The reason i`am not so satisfied is because i take a ferry sometimes, it`s quite embarrassing to walk the scooter onshore
The reason i`am not so satisfied is because i take a ferry sometimes, it`s quite embarrassing to walk the scooter onshore
14
Agility 50 / Re: Cold Start problem, 5 min / How to fix ?
« on: March 07, 2011, 12:04:15 PM »
I have asked a lot of dealers here in Norway, and this is what they say;
- Change Main Jet(#16) to a bigger one and the idle jet(#40)
- Set the Valves
Got some news from denmark as well, there is a problem with the needle in the carburettor.
The dealer from Denmark is saying that Kymco have sendt a official service doc regarding this matter, and that i should contact my local dealer.
Any other suggestions?
- Change Main Jet(#16) to a bigger one and the idle jet(#40)
- Set the Valves
Got some news from denmark as well, there is a problem with the needle in the carburettor.
The dealer from Denmark is saying that Kymco have sendt a official service doc regarding this matter, and that i should contact my local dealer.
Any other suggestions?
15
Agility 50 / Re: Starting at cold problems
« on: March 07, 2011, 06:54:22 AM »
What is the status on the scooter now?
Do you still have problems?
Do you still have problems?
Pages: [1] 2