Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mrperfektone

Pages: [1]
1
Agility 50 / Re: belt size chart
« on: October 05, 2011, 05:30:12 PM »
I've only driven 1000 km on kevlar belt so I do not know how well it keeps. but I've heard very good things about kevlar. scooter will be geared differently when Malossi belt is wider compared to the original, which means it will be a little more high geared. :)

Regards Rene

2
Agility 50 / Re: belt size chart
« on: October 05, 2011, 05:00:11 AM »
Is it Malossi kevlar belt? - I have it even installed on my agility but one must expect that the belt slipping the first 800 meters until it is hot it is very normal for kevlar and especially on a standard agility.

3
Agility 50 / Re: Kymco agility hard to start
« on: October 05, 2011, 04:49:43 AM »
It is not a gel battery but a lead battery:) I can not really see the point in the gel battery? - It is probably only necessary on motorcycles that have a high pitch level in order not to short out the cells?

Rene

(Sorry poor english google translate )

4
Agility 50 / Re: Kymco agility hard to start
« on: October 04, 2011, 04:44:49 PM »
The battery is fairly new but I have today put it to charge so let's see if it helps - I was actually on by mounting alarm which has spent some battery power when testing it:)

-Rene

5
Agility 50 / Kymco agility hard to start
« on: October 03, 2011, 06:24:25 PM »
I have a Kymco Agility having difficulty starting the electric starter when cold but starts easily on the kick starter. What could it be? - (Engine running around on the electric starter)

-Rene

6
Agility 50 / Re: Agility Exhaust model question ?
« on: September 30, 2011, 05:43:20 PM »
It runs nice and silent :) ... - Good exhaust :)

7
Agility 50 / Re: Agility Exhaust model question ?
« on: September 28, 2011, 08:10:25 PM »
It's too late now that I have purchased and installed it:) - I may switch to a better when it goes for about a year as you say;) ... - It should be mentioned that it did not fit 100% Kymco agility if others would be tempted. I was forced to change the hanger at the top but it was not a big problem if you have access to a welder and hotpaint after:) ... - I havede obviously not expecting to have to weld in it but I was not interested in having to send it back to Germany from Denmark:)


-Rene

8
Agility 50 / Agility Exhaust model question ?
« on: September 25, 2011, 07:07:08 PM »
Will it fit in agility?

http://www.ebay.de/itm/Auspuff-STANDART-GY6-50ccm-4-Takt-Jmstar-Jonway-Karcher-Kinroad-Lingben-Mawi-/220854078222?pt=Motorrad_Kraftradteile&hash=item336bedcb0e#ht_1725wt_1140


I can see agility are not on the list of models exhaust fit but it's the same engine block at all so it should fit: S? - The only difference I can see is that there is not the holder for the rear fender on this exhaust? : S Missing help: D!

Regards Rene

9
Agility 50 / Kymco agility Alarm
« on: September 10, 2011, 05:53:05 AM »
Hello:) ...

I have to mount the alarm on my Kymco agility but does anyone know if there is an original connector on the wiring network I can set it to?

Thanks in advance

Rene

10
Agility 50 / Re: Kymco agility rattle noise :S ?
« on: September 05, 2011, 06:32:39 PM »
It has only driven 6000 km but when I bought it I found out that the oil was below the minimum on the dipstick, but I've changed the oil on it and it seems that it has not been damaged when it goes well in the engine besides the funny sound when it's cold, I can hardly imagine the bearings in the crankshaft when they would make a noise constant. certainly the scooters I've heard where the bearings are defective
Regards Rene

11
Agility 50 / Re: Kymco agility rattle noise :S ?
« on: September 05, 2011, 03:50:16 PM »
Quote from: streido on September 05, 2011, 10:17:49 AM
Check the ramp plate, plate on the back of variator that keeps rollers in place, moves freely on the crank. Mine was stiff so i ground it out very slightly to fit better. Think the ramp plate was rattling off the guides on the variator due to it being too tight on the crank to move freely.

I'll try to check the variator but it surprised me that the problem disappears when it gets hot if it should be on the variator side


Rene :)

12
Agility 50 / Re: Kymco agility rattle noise :S ?
« on: September 03, 2011, 04:05:25 PM »
Thanks for the reply I check it:) - It just weird sound disappear when it gets hot: S ...

Regards Rene

13
Agility 50 / Re: i need help
« on: September 03, 2011, 07:34:52 AM »
Try this manual :) -    http://www.adrive.com/public/5614f29f303a50780fa4cc8422530f606fd939916f341111199658b01c374eb1.html


Rene:)

14
Agility 50 / Kymco agility rattle noise :S ?
« on: September 02, 2011, 09:36:27 PM »
Excuse my bad English (Google translate)

I have a Kymco Agility of 07 who has run 6000 km when I start it and it's cold, it has a strange rattling noise from the side by the cooling fan when it gets warm the noise gradually decreases. What could it be? - I know the oil pump sits "behind" the fan, so I'm afraid it may be it?

Thank you in advance:)

Rene

Pages: [1]