1
zx50 / Re: Blinkers going mad ???
« on: October 08, 2013, 02:06:46 AM »
If not that then the fuse may be your problem, I also had a horrible buzz when the fuse was blown
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
zx50 / Re: Clutch bolt broke the cvt case
« on: July 10, 2013, 10:52:00 PM »
I think its shot from the way the flange nut worked off. More stuff to learn, thanks for the advice on reinstalling that, do you happen to know the specs of the flange nut?
4
zx50 / Re: Mods to get 5mph
« on: June 01, 2013, 04:20:03 AM »Here's what the manual has to say about removing that cover (probably needs a tap with a rubber mallet);
You suggested that for me as well and the mallet tap worked perfectly.
5
zx50 / Re: Kymco zx50 super fever 50-60 mph free modification
« on: May 12, 2013, 02:21:42 AM »So, mr aggravated Jew, how have you been getting in with your scoot?
I've taken the right hand rear fairing off mine and applied black silicone sealant around the stator cover. I'm fed up of water getting in and causing the scoot to fail. Touch wood, but no failures since its application !
Just 17 days now until the big trip to the Isle of Man !
Well I got scooter assassins boss in the mail, and it is the same size as the one that came with the jasil variator. The jasil works fine with the stock back plate. Cdi is also from SA and installed. I forgot to look and see if my exhaust is restricted by a washer.... Speed is about 50mph indicated, maybe a little more or if I can go on a longer straight away, so Im guessing thats about 45 if I were to confirm. Oddly I seem terrible off the line so I have some more weights coming to play with. I do not have the tools to shave the drive boss so that will be a ways off for me.
6
zx50 / Anyone running pegs or a foot bar
« on: April 25, 2013, 03:53:48 AM »
My lady wants pegs or a foot bar. It seems like an easy enough install. Anyone run that? I was just thinking of drilling through the floorboard mat a running a bar with a bend on the front 2 holes maybe powdercoated black
7
zx50 / Re: Kymco zx50 super fever 50-60 mph free modification
« on: April 25, 2013, 03:51:18 AM »
Sweet. Thanks. I have a boss on the way, my cdi is here. Then Ill mark up the variator. The stock belt is a much tighter fit than the belt on my ruckus. Is that a 2 stroke thing?
9
zx50 / Re: My second ZX50
« on: April 23, 2013, 01:07:56 AM »
So is the one from scooter assasins already the shaved down size? Im running he boss that came with the jasil variator but I didnt measure it. 
10
zx50 / Re: Kymco zx50 super fever 50-60 mph free modification
« on: April 17, 2013, 02:30:54 PM »
I will try that, still have not sent it back yet. @ the price I was hoping not to have to mod the mods.... I should know better by now.
11
zx50 / Re: Kymco zx50 super fever 50-60 mph free modification
« on: April 16, 2013, 11:00:49 PM »
ya. They are going to let me return it. My stock drive boss doesnt look restricted. Im more bummed about the variator not working than worried about the return. My scoot is a 2006, maybe this variator is intended for the earlier model
Nightmare. Have you been back in touch with them ?
12
zx50 / Re: Kymco zx50 super fever 50-60 mph free modification
« on: April 15, 2013, 11:38:03 PM »
$80 usd from colorado powersports on ebay
14
zx50 / Re: Kymco zx50 super fever 50-60 mph free modification
« on: April 15, 2013, 06:36:58 PM »
I have the kysc10. The boss didnt appear restricted is the difference subtle?
Dies anyone have a pic of a restricted next to an unrestricted?
Dies anyone have a pic of a restricted next to an unrestricted?
15
zx50 / Re: Kymco zx50 super fever 50-60 mph free modification
« on: April 15, 2013, 06:34:29 PM »
It will clear the gear jagged part of the crankshaft just barely super tight, but won't go beyond that. This is an issue of millimeters, maybe it was made for the earlier kymco?
Pages: [1] 2