Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - joeboy

Pages: [1]
1
People 150 / People 16fi
« on: December 26, 2019, 09:04:48 AM »
Hi I have just bought a people 16fi and ridden it back to cambodia from Vietnam. I got a good deal on it in Vietnam its a 2013 model and only has 14000kms on the clock. The problem I am having is it won't go over 85kmh. I think that's a like low even for a 125..my bike had a tps error when I bought it but it now has a tps and ecu as its a combined unit on the throttle body on this model. It was an original kymco part fitted by the shop under warranty. Its very good on fuel and goes very well but sadly no top end.

2
Agility 50 / chinese kickstart
« on: June 20, 2010, 04:26:02 AM »
I got a full kickstart for the chinese gy6 for not a lot of money but found it was slightly different on the kymco engine. The pinion shaft is shorter on the kymco. So i had to grind a few mm of it to make it work, and not use the washer behind it. It works perfectly now.

3
Agility 50 / Tickover all over the place
« on: April 16, 2010, 10:42:44 PM »
Has anyone had this before? i just cant get a nice tickover shes either racing or nearly cuttting out.

4
Agility 50 / MOT today guys
« on: April 12, 2010, 03:37:41 PM »
my agility passed its mot today, for you guys over the pond thats a roadworthyness test we have to put all our vehicles in for when there over 3 years old.

It had a slight weep on the fork leg thats all.

I did notice that idle was all over the place but other than that i got 45mph out of her and 40 on the slight inclines which isnt bed to be honest.

She is ever so slightly lean as i still have the 80 jet in her (the 88 was jsut too rich) but other than that shes good to go. What size jet should i go for next? is it worth tryin an 82 or just go for an 84?

5
Agility 50 / Jet drillers
« on: April 06, 2010, 06:30:34 PM »
Do you guys know what size drill gives what size jet, I have a stock 80 jet and its a shame because i could use it if i knew how to make it say an 84 or 86 but i dont know what size drill to use. maybe one of you have made some kind of chart on what size jet is what size drill?   :)

6
General Discussion / You just have to see this stuff is so wrong
« on: April 03, 2010, 11:45:44 PM »


Try to watch the whole movie its shocking.

7
Agility 50 / Where do these things connect up to?
« on: March 27, 2010, 08:11:35 PM »
You might already know but i am having some problems putting this agility back together...firstly i need to know were the airbox intake pipe goes to on the other end?

Secondly the pipe into the front of the transmission cover where does that go to? is it the same pipe? Can you tell me in words please or a picture as i have searched all the parts diagrams and there great they just dont show what they connect to.

Thanks.

8
Agility 50 / Gas tank tap
« on: March 26, 2010, 07:59:49 PM »
Hi guys, i bought my agility in bits as it was stolen recovered. I need to know if the gas tank tap has some kind of washer as mine leaks.

A picture or diagram would be great.

9
Agility 50 / Where do these bits go
« on: March 23, 2010, 07:47:38 PM »
Hi guys, can you identify these for me i have them left over after i got my agility in bits i cant seem to figure out where they go or what they are for..

Pics back would be great.

10
Agility 50 / derestricted variator bushing/bush/spacer.
« on: March 23, 2010, 04:00:34 AM »
Does anyone know of a good place in the UK to get one of these from?

11
Agility 50 / Hello guys, quick question for you.
« on: March 23, 2010, 02:39:27 AM »
I have an agility that i bought in bits, I am in the process of rebuilding it.

I have a metal bracket and i just cant find where it goes, can you help.


Pages: [1]