Show Posts
1
People 150 / Help me troubleshoot my No-Start
« on: September 28, 2020, 07:58:20 PM »
Hey guys.
I started another thread earlier thinking it was my Kill Switch but evidently the thread has been locked so I'll just start another thread.
Someone suggested I take a look at my battery. Its new, its fully charged and yes it is turning the engine. Below you can see my multimeter test results on the battery.
A couple of other things to make note of. I used a sparkplug tester to see if I was getting spark. Here is the video showing I'm getting spark.
New oil
New spark plug gapped at 0.7mm
New battery
New carburetor
All fuses are good and connected well
New gas (yesterday)
Verified Petcock is fully functional
Trying to adjust both the idle throttle cable and the idle gas screw next. Still not turning on.
I started another thread earlier thinking it was my Kill Switch but evidently the thread has been locked so I'll just start another thread.
Someone suggested I take a look at my battery. Its new, its fully charged and yes it is turning the engine. Below you can see my multimeter test results on the battery.
A couple of other things to make note of. I used a sparkplug tester to see if I was getting spark. Here is the video showing I'm getting spark.
New oil
New spark plug gapped at 0.7mm
New battery
New carburetor
All fuses are good and connected well
New gas (yesterday)
Verified Petcock is fully functional
Trying to adjust both the idle throttle cable and the idle gas screw next. Still not turning on.