Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - philipgunter

Pages: [1]
1
zx50 / Handle Bars ?
« on: May 28, 2012, 12:38:29 AM »
Hello Everyone,
Im hopeing it get some info on a handlebar replacement for a zx 50 super fever after getting the spark problems fixed in my last post. ok here is my problem the handlebars have a good amount of rust going on. and the plastic parts are broken in a lot of places where the front and back that go around the handle bars. how hard would it be to put a set of  new bars on and just hook up a single speedo on the bars ? and not put all the plastic back on and do away with the Kycmo speedo.


Thanks everyone.

Philip

2
zx50 / We have Spark!!
« on: May 11, 2012, 11:54:43 PM »
Hello Everyone,
I just had to post the news and thank everyone who worked with me on my no spark problem ;D i came across a guy i work with and was telling him about the no spark problem when he told me had a 6 Pole magneto stator for a scooter he had sold about a year ago i asked if he still had it and he said yes. he wanted $10 for it and he brought it to work  ??? the box is labeled  ( 6 pole magneto stator gy6 150cc) i told him i don't think this will work because my scooter is only 50cc boy was i amazed the stator is a perfect fit! the pulsar coil i had to drill the holes a little bigger for the bolts holy crap i put it together and hit the stater button the spark was wicked from the plug i turned it loose very fast was like sticking a finger in a wall outlet. anyway were running again thank you to everyone.

Philip 

3
zx50 / CDI Question
« on: May 07, 2012, 08:23:05 PM »
New CDI Unit question just replaced CDI Unit still no spark :( the new unit has a Green Led on the end of box  anyone know what it for ?? i hooked all 5 wires up
here is how i hooked them up the green led does not come on.

CDI Box                    Scooter
Red                         Black/Red Stripe
Black                       Black/White Stripe
Blue                        Blue/Yellow Stripe
Green                      Green No Stripe
Yellow                     Black/Yellow Stripe

Still no spark and put on New Coil also.

Thanks Everyone

4
zx50 / CDI Question
« on: May 05, 2012, 02:43:41 AM »
Hello Everyone,
Does anyone know if the oem cdi on the zx fever is AC fired CDI or DC fired CDI?

Thanks to all.

Philip

5
zx50 / No Spark
« on: May 03, 2012, 05:43:29 PM »
Hello Everyone,
I'm looking for a bit of input my zx 50 has no spark to the plug ? so here is what i can say i put a volt meter on the two spades  the green wire and black with yellow stripe i removed from the coil and hit the starter button volt meter is reading 40 -41 volts but no fire at the plug,i got a new plug but no spark ? it was at least firing when i got it :) and yes the kill button is working tested with ohm meter on and off.

Hope to here from someone about this problem

Thanks Philip

6
zx50 / Kymco ZX Super Fever / Scout
« on: April 30, 2012, 11:36:17 PM »
Hello Everyone,
I just got a 2005 Kymco ZX Super Fever while looking online i found a manual for KYMCO ZX / SCOUT 50 is there a difference in the Super Fever and the Scout? the parts look like what i have on the Super Fever ?? also does anyone know what type a motor is on the Super Fever i just cant find anything one person told me the motor is the same on the Honda spree ? any info would be great on this motor.

Thanks Everyone

Pages: [1]