Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bmcafee

Pages: 1 2 3 [4] 5 6 7
46
Agility 50 / Re: belt too long?!?!!?
« on: August 13, 2011, 03:00:33 AM »
yea there is ware I think I got the frankenstien special I deff need the 699mm belt even though I have 12 inch wheels. The total sound of the bike is different at speed and I can feel a new vibration from the back. There is also a not so friendly sound that is makes when i cut off the engine. I would love if I could find a 709-18-30. it would be nice having an extra cm but I have way too much right now. I think I can use this sparingly untill I can get a new part in next week.

47
Agility 50 / Re: belt too long?!?!!?
« on: August 13, 2011, 12:18:46 AM »
I know the size difference is determinded by wheel size. I cant compare the old one due to it shreaded at 43 so there was only one piece that was longer and an inch. I can tell froim placeing the belt it that is is alot bigger than the original. I used to have to load the belt into the pulley and even then it would barely fit onto the boss. The new one slides right on with a ton of slack. I am about to recheck the belt I took it for a ride of about 5 miles and i think it is slapping the outter casing from the sound. will update.

48
Agility 50 / Re: Just fell off my Scooter
« on: August 12, 2011, 09:37:10 PM »
Holy crap man, how fast were you going?

49
Agility 50 / Re: belt too long?!?!!?
« on: August 12, 2011, 08:23:03 PM »
So with the new belt I still feel that it might be too long but I took it for a test run today seems to be fine. Just nervous about the different from the old and new I think the old one way have been 699mm and the new is 729mm. went from 8gr weight down to 7 and wow what a difference. havent been able to take it on a strech of road long enough to see how it effected top end but still optomistic, climbs hills much better. Thanks for all the imput guys ill update this if it shreads in the next week but hopefully not.
Thanks again,
Brian.

50
Agility 50 / Re: belt too long?!?!!?
« on: August 12, 2011, 04:31:12 PM »
I noticed that It was not wasy to fit the old belt in I had always had problems, I would have to pre load it in the pully, maybe the old belt was too short idk I will tighten everything togeather today and see what it does when it is running and just keep my finger crossed. Wish me luck ill keep posted.

51
Agility 50 / Re: belt too long?!?!!?
« on: August 12, 2011, 01:43:17 AM »
Batman,
It is touching on the case above and below the pully there is enough slack I am afraid that if it does settle into the pulley that there will be WAY to much slack and not be able to get any kind of frictioin off of the drive boss, like the boss will spin but not the belt. as it is already making contact.
Blue,
 the stock one broke and I was told this was the replacment for the stock one. Thats what my problem is, I cant messure the old on due to it falling apart at 43mph there is not much left. so my issue is what size to get.

52
Agility 50 / belt too long?!?!!?
« on: August 11, 2011, 10:02:57 PM »
I know there was another thread on belts but i didnt want to thread jack. mine blew apart last night so today i read the other thread befor going to the parts store and thought I got the right size for 12 inch wheel 729mm length but when I went to slap it in I noticed that it is touching the casing around the the back side so I think if I were to ride it with this it would get destroyed, possibly jacking something wlse up in the process. Really confused any idea's would be awesome. oh and my ag does have the 12 wheels just remeasured.

53
Agility 50 / Re: Never ending carb tuning issues
« on: August 09, 2011, 10:34:59 PM »
not no derail the thread but were you able to purchase the 95 or did you have to drill it yourself? been looking for one and can only find 90.

54
Agility 50 / Re: Tapping..
« on: August 04, 2011, 09:56:17 PM »
Right on Baddi good to know!! I will look into the feelers.. I hate spending money...
Thanks alot guys!!

55
Agility 50 / Re: Tapping..
« on: August 04, 2011, 05:47:11 PM »
Thanks great video, What I was hoping for was to find somthing that I can use to mesure the distance besides buying calipers..

56
Agility 50 / Tapping..
« on: August 04, 2011, 03:09:54 PM »
 I am windering if the tappers on are too loose but I dont know if any of you know a diy way to regap them to the proper place it's supposed to be .04 for the intake and .06 for exhaust, I think.. wondering if there is a crafty way to messure it out.
Many thanks,
Brian

57
Agility 50 / Re: interchangable parts???
« on: August 04, 2011, 06:08:22 AM »
totally feel like a nub... I waited for te harness to come befor looking around further than my original checking. the red wire came off of the ignition... and the green was on its way off. So I sodered them both back on and she is running again. I noticed that the factory did a really hack job putting them on in the first place.

58
Agility 50 / Re: interchangable parts???
« on: July 27, 2011, 10:04:08 PM »
alright I give it a look over after dinner, thanks again ill let you know what I find.
Brian.

59
Agility 50 / Re: interchangable parts???
« on: July 27, 2011, 09:51:49 PM »
head stem? not sure what that is.

60
Agility 50 / Re: interchangable parts???
« on: July 27, 2011, 05:48:07 PM »
I have a short some where, I was riding along and hit a bump and everything cut out, the battery has power and the fuses are still in tact. no power to anything though so it is the wiring or the ignition, i assume..  After looking over the scoot the previous owner layed it down and reworked the wiring so I wanted to replace it, just wish at my lizure. It had died a few times but I think that the scoot moving during kickstart shook the wires back on a temp untill it went for good. still not 100% but I feel that this would be the best starting point. what fo you think sid?
.

Pages: 1 2 3 [4] 5 6 7