1
Agility 125 / Front caliper seals
« on: February 22, 2023, 06:33:14 PM »
Does anybody know what size the seals are for the pistons?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
3
Agility 125 / Re: Under petrol tank tray removal
« on: January 26, 2022, 09:31:06 AM »
Cheers mate ill give it a go later as I need to change my left side indicator.
4
Agility 125 / Under petrol tank tray removal
« on: January 23, 2022, 09:39:19 AM »
Hi guys me again how would I go about removing the tray under the petrol tank to get to the wire and nut for the indicators. Many thanks.
5
Agility 125 / Rear indicator changes
« on: January 22, 2022, 04:51:32 PM »
Has anyone changed out the standard bulb holders for led ones if so what size thread?
6
Agility 125 / Re: Agility 125 hard to start
« on: April 12, 2021, 01:50:07 AM »
Yeah all good so far
7
Agility 125 / Re: Agility 125 hard to start
« on: April 04, 2021, 10:21:31 AM »
Yeah the intake was .003 exhaust was .002.
8
Agility 125 / Re: Agility 125 hard to start
« on: April 03, 2021, 02:41:08 PM »
I have now checked the valves and set them up correctly.
I have a new cdi coming today and will fit that also will hold a regulator aswell. Thank you very much
I have a new cdi coming today and will fit that also will hold a regulator aswell. Thank you very much
9
Agility 125 / Re: Agility 125 hard to start
« on: April 02, 2021, 05:35:34 AM »If the valves are okay it could be a fuel problem, or the CDI on your scooter is dying.
If the engine starts easily after a cuple of minutes (after the engine died) it should not be a fuel problem - the CDI is most probably on it’s way out. I would then just install another one without fiddling elsewhere.
If the valves are okay it could be a fuel problem, or the CDI on your scooter is dying.
If the engine starts easily after a cuple of minutes (after the engine died) it should not be a fuel problem - the CDI is most probably on it’s way out. I would then just install another one without fiddling elsewhere.
Yeah it starts fine after a couple of minutes just keeping the dam thing running.
Cheers for your advice
10
Agility 125 / Re: Agility 125 hard to start
« on: April 02, 2021, 04:10:05 AM »can you expand on it 'cuts out often'? Dies right after starting? Dies when you first give it gas? Dies while riding? That can help narrow down potential problems.
Dies after a couple of minutes. And also once when I was stopped at traffic lights.
Many thanks
11
Agility 125 / Agility 125 hard to start
« on: April 02, 2021, 01:18:21 AM »
My 2015 agility 125 starts but cuts out often. And will sometimes sound like an old 2 stroke. I've checked the fuel spark ect. I will check the valves today but I've seen on other posts it could be the cdi? Any help greatly appreciated
12
Agility 125 / rear suspension removal
« on: May 22, 2020, 03:23:19 PM »
hi does anyone know how to remove the rear suspension on a agility 125 ?
Many thanks
Many thanks
13
Agility 125 / Re: Front disk brake bolts
« on: December 12, 2019, 08:58:44 PM »
They are hex heads the disk is knackered so thinking of cutting it off the welding a nut on.
14
Agility 125 / Front disk brake bolts
« on: December 12, 2019, 04:19:28 PM »
Hi my disk has cracked so I have a new one. The only problem is 2 of the bolts have stripped heads (hex is now rounded) any advice on getting them out? Many thank
15
Agility 125 / Re: Spot lights
« on: January 13, 2019, 10:33:19 AM »
It's completely standard with no extra power being drawn
Pages: [1] 2