1
Super 9 / Re: 3500 wheel star moving
« on: May 18, 2017, 08:34:36 AM »
clutch pads look good
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Super 9 / 3500 wheel star moving
« on: May 17, 2017, 09:17:54 AM »
Hi, all my super 9 lc, wheels star moving around 3500 rpm, is my clutch slipping or clutch spring too stiff, I took cvt cover off and didnt see any dust, shoes is glaze surface, what r u guy suggest, thank
3
Super 9 / Re: upgrade 49.5 cc to 70cc
« on: April 03, 2017, 02:19:35 PM »
new carb it oem, in service manual oem Main jet(Unlimited/limited speed)#92/#78, I wonder if i can go little bigger like #95 or #96 by drilling it out?
4
Super 9 / Re: upgrade 49.5 cc to 70cc
« on: April 03, 2017, 10:43:16 AM »
thank you for the in put, does anyone know where i can get tune jet for carb or how tune carb?
5
Super 9 / upgrade 49.5 cc to 70cc
« on: April 01, 2017, 09:38:46 PM »
Does worth to upgrade my 2003 super 9 49.5cc LC to 70 cc Cylinder Piston Kit Kymco Super 9 LC Dink 50 cc (Airsal 47.6mm Big Bore 70cc Cylinder and Piston Kit ), thank
6
Super 9 / Re: go up hill bottom out
« on: April 01, 2017, 08:45:34 AM »
I got the moped free, and it come 3gr & 6gr roller weight on it, I believe it have been modify, it has Tecnigas exhaust on it, soo should put back 8gr roller weight?, how does it effect speed and torque while on flat road vs uphill, thank
7
Super 9 / Re: go up hill bottom out
« on: March 31, 2017, 09:44:31 PM »
AUTO BYSTARTER SET screws broken off try to drilled then out end up fck the carb lol, replace complet CARBURETOR ASSY from http://www.kymcopartsmonster.com....strange flat seem be fine ... up hill struggle, should I put original roller weight (8gram) instead of 3gram & 6 gram stack?
8
Super 9 / Re: go up hill bottom out
« on: March 31, 2017, 10:23:05 AM »
I only weight 125lbs, go up hill it bottom out rpm seem be max 10k and barely, but flat road seem be fine, what roller weight, variator, spring should I use ?
9
Super 9 / go up hill bottom out
« on: March 29, 2017, 11:49:47 PM »
new carb, plug, unrestrict flat road super 9 lc can 30-40 miles easily rpm around 8-9k, when go up hill bottom out rpm max out 10k, barely go up around 20mph max cant go any faster any suggestion? engine code SH10DA
10
Super 9 / Re: kymco super 9 won't start
« on: June 01, 2016, 09:43:46 PM »
have you check to see it have spark while starting, check fuel by loose drain screw see anything coming out, see the air filter clog, in order engine start need 3 things, spark, air & fuel, 1 of 3 not there it wont run
11
Super 9 / Re: Variator kit
« on: May 30, 2016, 07:38:28 PM »
No, I order ramp plate & 6 rollers, and it isnt come with spring, spring already on the bike before I got it, thanks 4 the info
12
Super 9 / Re: Variator kit
« on: May 29, 2016, 08:18:20 PM »
Hi Chaz, I got scooter free, dont know what have been modify, I see big spring on clutch is white, and dont know what original (oem) look like
13
Super 9 / Re: Variator kit
« on: May 29, 2016, 09:51:56 AM »
thank Chaz, originally it have 3x 4.5gr and 3x 6.5gr roller it in but when I riding it rpm 10k plus dumping gas to get moving around 30mph, cant go any faster, a tank of gas less than a week, that why i change to 8.5gr roller better in gas, rpm drop from 10k plus to 6.5 to 7k, delay engagement, but when it move it can go up 35 to 40mph wot, let me order oem spring to try and see what happen
14
Super 9 / Re: Variator kit
« on: May 26, 2016, 10:16:04 PM »
I just install new variator with 8.5gr rollers, it's slipping or delay about 5 to 10 second before it kick in and move forward, is this normal, how long does it take to break in?
15
Super 9 / what engine lc super 9 2003
« on: May 18, 2016, 08:57:58 AM »
does any know what engine originally come with 2003 lc super 49.4 cc (SH10DA), Can this engine compatible with GY6 Engine Parts, I try to find parts, but dont want to get wrong part put in, parts like seal, carb, cylinder head, piston etc., thank for your time
Pages: [1] 2