Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - customx22

Pages: [1] 2 3 4
1
zx50 / Re: My lil" red demon
« on: May 15, 2011, 12:37:49 AM »
wanna go fast get a better pipe leo vince suck ass ,find a scropion or arrow pipe and you wanna go all out like mines i have a 120 cc stoker water cooled fitted with taiwan black mani fitted with v force reed and exhust pg fatty pipe ,30 mm oko . it can go over 80mph easily

2
Agility 50 / Re: What weight rollers are best for the agility 50 4 stroke?
« on: May 15, 2011, 12:32:11 AM »
you will need the race cdi to go past the 50 mph i have an agilty with leo vince exhust and the 90cc motor with big value head and 52mm piston i hit the rev limiter all day i order a cdi now.i had 2 before so i know everything you need to do to go 60mph i bury the speedo on my last agility.i know my sh** im from hawaii and scooter we know all

3
Super 9 / Re: Hey guys new here. Need some help with mods on Super 9
« on: May 28, 2010, 06:56:15 PM »
eliminate the oil plug completely and put a oil plug and run premix gas and oil at 40:1 ratio or 3oz to a gal.the best oil to run is repsol 2T Racing,redline 2t racing oil,or ams oil dominator.those burn the cleanses and mix the best.

4
zx50 / zx50 highests speed reached?
« on: May 10, 2010, 09:40:06 AM »
hi im just curious on the high speed you folk reached with your modded zx50?
i own a sym dd50 but it has the same motor i was able to reach 67mph today.

5
Agility 50 / Re: average 15 miles
« on: April 27, 2010, 07:16:53 PM »
Quote from: Kimcofan on April 02, 2010, 03:24:22 AM
Im gonna try out my stock 6g rollers and see what happens, I got my k&n air filter today and my jet last week, this weekend I am going to do carb mods raise needle jet and filter it up then I am ready to hit the road and looking forward to increased performance!


 hey kymcofan use 5gram weights with stock spring or 1000rpm toque spring and 2000rpm clutch

6
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 21, 2010, 10:51:31 AM »
where did you buy it from? how much was it $200 is the hurricane the one you want.the typhoon is not really that good but ok

7
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 21, 2010, 10:49:15 AM »
OK heads up the v8 i have is typhoon that for stock motor to 72cc but low end to  mid-range pipe.the other v8 is the hurricane this is a mid-top end pipe this is the one you should get.i have the typhoon.it a decent pipe.i just bought the ultimate pipe PG LONG mid-top high rev pipe will get you about 5mph more that v8 hurricane.ways to tell which v 8 you have is if you don't have the badge you have a typhoon and the one with badge is hurricane but also check the length of the pipe the hurricane is longer because it has a chamber in it.another thing if the exhaust hole is 33mm you have hurricane and if its 28mm you have the typhoon   

8
Agility 50 / Re: what main jet to match 80cc with the original 18.5mm carburator?
« on: April 21, 2010, 10:35:02 AM »
hi 88 jet will be perfect i fit a agility just like your setup.

9
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 16, 2010, 08:57:44 AM »
ya youll need maybe 8to1 gear. youll have a lot of pick up but make sure your jetting is right. the pipe you bought is the right pipe for what you wanted to do(low end mid range.ye it normal for it to turn brown.you need to paint the pipe so it does rust but mainly if you live near salt water like here in hawaii

10
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 14, 2010, 08:56:20 AM »
hi sidthesloth what kind of moped do you have a zx50? yes there are, i top out at 65mph and it will be 75mph soon because change my ratio from 7.4 to 6.7. this pipe here is an all around pipe but more bottom end midrange.more for people who do wheelies. but i like it because it still get me over 60mph with great bottom end.my sym wheelies with this pipe but not full wheelies because i tuned it for top end highway driving.what your set up? polini corsa bore is the best 72cc out there

11
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 12, 2010, 04:14:19 AM »
right here

12
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 11, 2010, 09:54:08 AM »
mine wheels are 10in.but you should worry about the weight because you have the right sizes.it will probley be an 8g or 8.5 but idk.you just have to try it.with the 1500 spring youll get more top end and mid range but for me i get all around power because of the pipe im running (V8).i messed with the weights  and for top end the heavier the weight the better. if you want to 60mph youll need the 1500 spring and then find the weight that get you there.

13
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 11, 2010, 04:51:22 AM »
i run 9 gram dr pulley with the 1500 but may be different with you because you have 12in rims

14
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 09, 2010, 10:12:59 AM »
you should run 1500 torque spring

15
Agility 50 / Re: I HAVE MY 105 jet and by thursday I will have my K&N air filter
« on: April 08, 2010, 11:50:08 PM »
shaka your gonna need a temperture guage soon.400 deg your engine toasted.westach is the on you need item # 2C1 and probe 712-4WK J wire CHT 14mm under spark plug,need to take off spark plug washer to. cost like $80.youll need this. westach.com

Pages: [1] 2 3 4