1
Agility 50 / Re: Main Jet Size
« on: March 28, 2011, 04:53:01 PM »
Tried adjusting the idle screw up and down and still does the same problem. Idle goes way up where scooter is shaking, then way down where it almost dies.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Agility 50 / Re: Main Jet Size
« on: March 28, 2011, 03:05:30 PM »
Ok so I finally got the 85 main jet installed. Runs great, only issue is when the scoot is at idle now. The idle will drastically go way up or down. Any ideas why this would be happening?
3
Agility 50 / Re: Main Jet Size
« on: March 15, 2011, 05:56:42 AM »
Well I actually got 5 gram Dr Pulley Sliders. I have been riding with them a couple days and really love them. Great acceleration, did not loose much top end, and hills are a piece of cake now. I would highly recommend Dr Pulley Sliders as well as the 5 grams. I also just received my main jet in the mail today and it says 88 on the side and not 85. So I think I was sent the wrong jet size. I will still try the 88 but with my stock air box and exhaust, Im doubtful it will work. Guess ill see....
4
Agility 50 / Re: Main Jet Size
« on: March 10, 2011, 12:23:09 AM »
Yes I have de restricted the drive boss too. So if the #85 does not work would I need to go down to a #82?
5
Agility 50 / Main Jet Size
« on: March 09, 2011, 10:32:58 PM »
On my Agility 50 I have cut the CDI, put in a Malossi Variator with 5 gram rollers, put in a white Mallossi torque spring, and 1000rpm clutch springs. I just ordered a #85 main jet, will this main jet work without me having to do anything to the air box or the exhaust?
6
Agility 50 / Agility 125 parts on a Agility 50?
« on: March 05, 2011, 05:37:33 PM »
I have a 2009 Agility 50, and I need a left front turn signal, and I found one but it is from a 2009 Agility 125, does anyone know if it will work on my 50? Does Kymco use the same parts on the Agility 125 and 50?
7
Agility 50 / Clutch Springs
« on: February 19, 2011, 08:29:52 PM »
Will these fit a 2009 Agility 50 stock clutch? http://www.scooterworks.com/NCY-Clutch-Spring-GY6-50-P6696.aspx
8
Agility 50 / Re: My 2 year warranty is up next month so...
« on: February 17, 2011, 07:46:15 PM »
Can you post a link to the thread which you downloaded it. I would like to get it as well. Thanks
9
Agility 50 / Where to buy from?
« on: February 07, 2011, 09:47:12 PM »
I am buying some tuning parts for my agility 50,malossi variator, clutch springs, roller weights. Wonder where I should order all this from. Where do you guys order your stuff from?
10
Agility 50 / What Are The Best Roller Weights???
« on: January 31, 2011, 06:46:02 AM »
I am buying new roller weights for my Agility 50 and I am wondering what you guys think the best brand is?
11
Agility 50 / Re: Should I buy a new variator???
« on: January 26, 2011, 07:52:55 PM »
what about like clutch springs? Is there any benefit there?
12
Agility 50 / Should I buy a new variator???
« on: January 26, 2011, 07:44:08 PM »
I am going to put lighter roller weights in my scoot to get some better speed up hills, but is there any benefit of getting a new variator instead of the stock one (like say a malossi variator)?
13
Agility 50 / Battery
« on: June 06, 2010, 04:33:45 PM »
What kind of battery does the agility 50 take? I need a new one but mine is written in Chinese and i cant tell what kind it is. does anyone know?
14
Agility 50 / Speedometer
« on: March 23, 2010, 08:26:14 PM »
Does anyone use a self installed speedometer, since the stock speedometer is very inaccurate? If so which one do you recommend?
15
Agility 50 / Re: Got the variator done and CDI, now what?
« on: March 05, 2010, 02:47:41 AM »
What is CVT tuning? What do I need to do?
Pages: [1] 2