1
Super 9 / Re: 70cc piston kit
« on: May 07, 2010, 07:16:30 PM »
Thanks, I have been trying it but seems to be busy.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Super 9 / Re: 70cc piston kit
« on: May 07, 2010, 02:19:20 PM »
I found a site for all you looking for a different site. I think www.scootertronics.com went out of bussiness. I tried calling them for replacement piston rings and the phone number doesnt work. Check out this site for parts http://www.partsforscooters.com/
3
Super 9 / Re: 70cc piston kit
« on: April 27, 2010, 11:56:00 PM »
found my problem. The bottom ring is stuck in the ring groove. So I am losing compression. I am ordering new rings. Will let you know how it goes when I get them in.
5
Super 9 / Re: 70cc piston kit
« on: April 24, 2010, 12:01:00 AM »
I have done that, pulled it all apart and put it back together I will try cutting the plug wire. I have spark not sure if it is a bright spark. Well keep you posted will be a few days before I get there. Thanks again you have been a huge help
6
Super 9 / Re: 70cc piston kit
« on: April 23, 2010, 09:19:50 PM »
Zombie I went to the store and got a 90 and 95 jet for my kehin carb. I still cant get it to start. I removed the plug and put ether right into the cylinder. Nothing
removed carb and reed valves put ether in there nothing. any advice? I am totally losted here.
removed carb and reed valves put ether in there nothing. any advice? I am totally losted here.
7
Super 9 / Re: 70cc piston kit
« on: April 09, 2010, 01:14:54 AM »
so you think I made the jet to big? I am trying to get the jet to a 100. that is what I think I need. So let me get this right to big of a main jet wont let it start. even with ether?
8
Super 9 / Re: 70cc piston kit
« on: April 08, 2010, 09:44:07 PM »
will waiting for my jet kit i decide to drill out the main jet and shim the needle back one shim. I used a #59 drill bit and was crazy enough to do it with out a drill press. Now here is my problem I cant get it to start. I have spark i sprayed ether into the carb and it wont fire. Anyone got a clue where to look now?
9
Super 9 / Re: 70cc piston kit
« on: March 29, 2010, 11:12:43 PM »
here are the pictures I took of the cylinder kits
10
Super 9 / Re: problem with the s9
« on: March 28, 2010, 02:13:31 AM »
I dont know about the jerking part. I have done a few mods to mine, I would start with the unrestricted boss and go from there what I have learned is that if you put a pipe and 70cc piston kit on you need to make sure you rejet the carb. That is the probelm I am having right now. I have to get a jet kit cause it is running lean.
11
Super 9 / Re: 70cc piston kit
« on: March 27, 2010, 02:38:34 AM »
Yeah I think its a lean condition. I am looking at a bigger carb. It would be nice if they had a jet kit in the cyl kit. good news is my Boss came in the mail today so its time to take apart the clucth to change it. thanks again for the advice and I will keep you posted
12
Super 9 / Re: 70cc piston kit
« on: March 26, 2010, 10:56:14 PM »
I dont know the clearance of the piston. I have tried adjusting the carb and it doesnt seem to make a difference but i will try again. I thought of ordering a jet kit or bigger card for it. other than that it went together well took off like a bat out of hell till it bogged down and died on me.
13
Super 9 / Re: 70cc piston kit
« on: March 26, 2010, 08:21:10 PM »
Hey zombie. I got the piston kit in now I have a hard time getting it started. and it once stay running once I get it up to about 25mph it cuts off and hard to restart. any suggestions?
14
Super 9 / Re: 70cc piston kit
« on: March 26, 2010, 01:45:42 AM »
This is the site I got the piston kit from http://www.scootertronics.com/hipecyki70.html I dont recomend them if you are in a hurry took almost 2 weeks to get the part and they told me it would take 2-3 days to ship.
15
Super 9 / Re: 70cc piston kit
« on: March 26, 2010, 01:39:43 AM »
yeah got a lot of useful info from u all
Pages: [1] 2