1
Side By Side / Re: Door for a UXV 700 I LE EPS
« on: February 13, 2020, 09:53:38 PM »
I dont know but definitely wanting some.
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:12:01 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Code: [Select]
Sent from my SM-G960U using Tapatalk
3
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:11:38 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
4
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:11:29 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
5
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:10:44 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
6
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:10:20 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Code: [Select]
[URL][/URL]Sent from my SM-G960U using Tapatalk
7
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:10:10 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Code: [Select]
Sent from my SM-G960U using Tapatalk
8
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:09:52 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
9
MXU / 2016 Uxv700 turf making horrible noise in the driveline
« on: August 01, 2019, 03:09:37 AM »
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
10
Side By Side / Re: Drive belt
« on: October 05, 2018, 06:25:02 PM »
Following my uxv 700 belt is wore out at 600 miles its original but I'm very easy on it
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
Pages: [1]