Show Posts
1
Technical | How To / Kymco Xciting 400i ABS issue
« on: May 22, 2018, 11:42:26 AM »
Hi guys,
I am not sure if this topic has been mentioned before so i opened a new one hoping that someone has solution. I have 2014 XCT 400i ABS and I have strange issue with my front brake. I will try to describe.
Every first time when pressed the lever drops almost to the end and it doesn’t brake - or it breaks a little bit. When pressed second time (immediately after )works perfect. Also, when scooter is OFF, does the same, I need to make 3 m with it and the brake will drop again on the first press. ABS works i can feel it while breaking. Rear break works good with no issues.
I have aired brake fluid lines and replaced DOT4, inspected brake pads, brake disks, brake caliper and no leaks found. At begging i was thinking it is problem with setting the level (1-4) of lever and this is why brake catches low, but it is not an issue.
What do you guys think could be an issue, thanxxx
I am not sure if this topic has been mentioned before so i opened a new one hoping that someone has solution. I have 2014 XCT 400i ABS and I have strange issue with my front brake. I will try to describe.
Every first time when pressed the lever drops almost to the end and it doesn’t brake - or it breaks a little bit. When pressed second time (immediately after )works perfect. Also, when scooter is OFF, does the same, I need to make 3 m with it and the brake will drop again on the first press. ABS works i can feel it while breaking. Rear break works good with no issues.
I have aired brake fluid lines and replaced DOT4, inspected brake pads, brake disks, brake caliper and no leaks found. At begging i was thinking it is problem with setting the level (1-4) of lever and this is why brake catches low, but it is not an issue.
What do you guys think could be an issue, thanxxx