Show Posts
1
Technical | How To / Kymco super 8 50 2t running issues after upgrade
« on: February 25, 2018, 06:15:31 AM »
Hi guys,
Apologies if it’s already been requested but I’m at a loss and at the point of giving in !!HELP !!
I have changed the piston to a 70cc naraku one new gaskets etc and changed the carb to a naraku 17.5mm electric choke version with the same attachments for the old choke.
I have got it running with the air screw fully in then adjust out to try and see if the engine will increase revs. (No change)
Take it down the road and imparts it will rev and accelerate well for a few seconds then splutter I have to ease off from WOT and it will go back to idle. Sometime it will die and will restart after a second or two.
Is this a jetting issue or something else ?
Thanks in advance
Apologies if it’s already been requested but I’m at a loss and at the point of giving in !!HELP !!
I have changed the piston to a 70cc naraku one new gaskets etc and changed the carb to a naraku 17.5mm electric choke version with the same attachments for the old choke.
I have got it running with the air screw fully in then adjust out to try and see if the engine will increase revs. (No change)
Take it down the road and imparts it will rev and accelerate well for a few seconds then splutter I have to ease off from WOT and it will go back to idle. Sometime it will die and will restart after a second or two.
Is this a jetting issue or something else ?
Thanks in advance