Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dolac

Pages: [1]
1
LIKE 200i / Re: Dr Pulley Update
« on: April 14, 2018, 12:51:37 PM »
One of my friend have Agility 200i in Europe and he said that his are 13gr.. :/

I bought Agility 200i in Europe as well, but at the moment I am still in Taiwan :p

2
LIKE 200i / Re: Dr Pulley Update
« on: April 13, 2018, 01:22:23 PM »
good to hear that it works good with original variator!! :)
Guys, are there the same roller weights in Like 200i and Agility 200i?

3
LIKE 200i / Re: Dr Pulley Update
« on: April 12, 2018, 10:49:52 AM »
be careful on the variator you use.. I had install dr. pulley sliders into Malossi variator and it didn't work well for a long time.. In the beginning, everything was good but after 2000km sliders inside the variator turned and it stuck.. we opened the CVT, checked everything, installed it back properly and it happened again again.. Then i read somewhere that malossi variator and dr. pulley rollers can't work together.. I don't know but I just ordered one set for my kymco 100cc and will use stock variator

anyway, for those who feel any issue in transmission, just take a look on rollers first ;)

might be, or not, I dont know, I have only one experience with it, and it is with Bet&Win 250 engine ;)

Looking forward for other experiences :)

4
LIKE 200i / Re: Bore and stroke
« on: April 12, 2018, 05:09:11 AM »
Stig, is there any way to attach more than 4 pictures in one post? :D
I have chose more than 130pics lol
Need to cut them at least by half :p

5
LIKE 200i / Re: Bore and stroke
« on: April 02, 2018, 06:19:16 PM »
waiting for Stig as he is amoderaotr to suggest me where to upload pictures.. I have them all you mentioned here :)

6
LIKE 200i / Re: Bore and stroke
« on: April 02, 2018, 05:00:38 PM »
Should i attach pictures here or should I open new topic (which sub forum)?

And what kind of picture do you want to see, I have plenty of them, working on scooters, trips around Taiwan, all the mods I have seen so far (like installed turbo)..

Spring brake is this week, tomorrow I am planning my trip to Kenting, then to Taitung and back as on Saturday I have to be in Taipei, so next 5 days I will be all around Taiwan again and please don't blame me if I don't manage to upload pictures tomorrow. It is time to get some miles again :)

Stig, as I said, it is not my shop, but the guy call me family, I am there every day, and it is small Kymco garage with great mood and positive people. :)

Like's here are not so popular yet (and here is only 125cc version), younger population prefer yamaha cygnus, recently s-max 155, force 155.. as there are plenty of modifications they can install.. taiwanese people like shiny think like bulbs everywhere and so on..

Crossbolt, I am sailor as well, but on small sailboats (20-60ft), sailing is another passion :)

7
LIKE 200i / Re: Bore and stroke
« on: April 02, 2018, 05:03:47 AM »
its not only about Kymco, every country obviously have different rules.. cuz Yager 200 is called Dink 180 here.. I guess if there is above 150cc, 250cc and so on, in some country they called it 200, 300 and so on.. here in taiwan everything is way better, not sure it is about Kymco..

Here is paradise for scooters, everything you can imagine you can find it here and do modification as you want.. I got scolarship for MBA and as I am familiar with scooters for more than decade I found local Taiwanese guy that runs Kymco shop (but repairs SYM, Yamaha, Suzuki, Honda etc.) and we work together.. I have Kymco Kiwi 100cc with 64000km (original engine and clutch, last week changed front shocks!), Kymco KTR 150 (48000km) and Kymco Grand King 125 (28000km).. Scooters are like your legs in Taiwan, you dont walk, you ride.. very sad there is no models such as Racing 150 and G6 abroad Taiwan..

8
LIKE 200i / Re: Bore and stroke
« on: April 01, 2018, 05:45:24 PM »
sorry stig i am newbie on forum and from some reason I feel sarcasm in your posts..
I just wanna say, as I live in Taiwan for last 5 years, repairing scooters here, might help some people with problems but the main thing about this topic is that I just bought Agility 200i back to Europe and before I go home was looking for info about it.. If you take 2 minutes of searching you will find that there is not correct info about bore and stroke for agility 200i.. I don't have service manual yet so couldn't check it out..
for example,

https://kymco.com.au/agility16200i/

http://www.scooterino.com.au/showroom/agility-166-200i.html

https://www.bikesales.com.au/showroom/SHRM-AD-453396/2017-Kymco-Agility-16-200i/

this one is even different than those above and still not correct

https://www.autoevolution.com/moto/kymco-agility-16-200i-2014.html#aeng_kymco-agility-16-200i-2014-163

Cheers!

9
General Discussion / Re: Location of Scooter factories in Taiwan
« on: April 01, 2018, 04:56:48 PM »
When do you plan to go to Taiwan? I live in Kaohsiung and will be here till mid of May so might help you if your chinese is not good ;)

This should be TGB address,
No. 15, Yonggong 2nd Road, Yong'an District, Kaohsiung City, 828

10
LIKE 200i / Re: Bore and stroke
« on: April 01, 2018, 03:51:47 PM »
you need to divide pi number by 4.. and then you get 0.785
and bore and strokes are in mm but we need cm so you divide numbers by 10 to get cm, right

example, 52.4mm/10=5.24
so you have to put 0.785, multiple with bore (squared (that is why i put bore * bore)) and multiple with stroke.. and you will get ccm :)

anyway, on every single online info about Agility 200i there is bore and stroke from 125cc engine..

11
LIKE 200i / Bore and stroke
« on: March 31, 2018, 06:16:22 PM »
Hi guys! What does your user manual or service manual says about bore x stroke in your engine?

I found info that there is 52.4 x 57.8mm
Which means when we put into formula

=0.785x5.24x5.24x5.78= 124cc

Any thoughts?



EDIT: I was looking for Agility 200i spec and all of them says the numbers above.. now, when I have searched for Like 200i spec, numbers are, bore x stroke 60x57.8 which has sense.. ;)

Sorry, about it, moderators can lock or erase this topic.. seems not much info about agility 200i :/

12
General Discussion / Re: New Kymco Electric scooter
« on: March 26, 2018, 04:25:18 AM »
I live in Taiwan and more and more people are complaining about them.. actually their range is around 80km, with some electric issues and electric motor bearings as well.. in the end, their management push their customer to buy membership (otherwise you can't ride it)
Prices are in USD
$10.29/month - 100km, $0,09/km after
$17.14/month - 300km, $0.09/km after
$27.45/month - 600km, $0.05/km after

As gas costs 0.93/liter it is double more expensive compared to 125/150cc scooters/motorcycles..

And the biggest issues are service shops.. They are overbooked, if you have to repair your gogoro you have to wait till 2 months what some people drive crazy and there are already 2nd hand gogoro on sale..


13
General Discussion / Re: New Kymco Electric scooter
« on: March 23, 2018, 02:22:42 PM »
I agree with all of you, but as I live in Taiwan for last 5 years, people mostly here talk about going green without knowing what stands behind those batteries..
But Kymco has to compete with Gogoro here.. There is around 25 millions scooters on a very small island and if they make a better management Gogoro will have problems.. In places like Taiwan, this model will work fine, this isn't a scooter for long trips at all, but for the city might be a good solution.. Problem here are 2 strokes which I like but no one do any maintaining and they smell extremely bed with a huge blue smoke on back..

Guess this topic should go in another forum about Kymco news :)

Pages: [1]