Show Posts
1
Grandvista 250 / Re: Electrical problems with my GV 250
« on: July 25, 2010, 12:35:35 AM »
I've experienced similar problem with People S 250. Replaced starter relay 3 weeks ago as relay appeared to be stuck open and wouldn't start. Problem seemed solved. Now starter won't stop as it appears new relay is stuck closed. Will check for worn wires as well as contacts on starter button. Battery is new. The starter relays have cost about $50 with shipping. I read on the forum that a standard Bosch 30 amp automotive relay could be used in place of the OEM part as long as the OEM connectors were soldered into place. That would sure make experimenting less expensive. Thanks for your thoughts.
Have now searched for worn wires and checked starter button. Don't see any problems. Scoot starts when battery connected and starter button pressed, but starter continues to run after engine switch turned off. Any thoughts on what might cause two relays to stick in different positions? Any help on this would be appreciated. Thanks.
Have now searched for worn wires and checked starter button. Don't see any problems. Scoot starts when battery connected and starter button pressed, but starter continues to run after engine switch turned off. Any thoughts on what might cause two relays to stick in different positions? Any help on this would be appreciated. Thanks.