Show Posts
1
Agility 125 / Re: Post up your mods and your results here. Mechanical or external.
« on: August 19, 2010, 09:54:16 PM »
I have just ordered a "performance exhaust"-$79.00 on Ebay. I checked it out against more expensive ones and was told parts for the GY6 157QMJ 150cc motor would fit the 152 QMI 125 cc motor. I'll post what I find when I do install next week. I also purchased a 30MM CVK carburetor and intake on E-Bay for $129.95 Scooter stores had same thing for $169.00 for carb only. Next week when I install I'll post and let you know if I messed up my zippy little Agility 125 or made an worthwhile improvement.
SCOOTERBOY
OK. I got the exhaust and the pipe didnt have the proper bend to it to fit on the exhaust manifold and go out through the frame as it is supposed to. After trying to make it fit I finally remounted the old exhaust the cut the muffler off were it passes just below the oil dipstick. I then cut the new exhaust pipe which is a slightly larger diameter and slid it over the stock pipe. I sealed the joint with JB Weld and bolted up the bracket and then attached the new stainless muffler to the flange of the new exhaust pipe as designed. Installation looks great and sounds killer! I havent gone for a test ride since it raining. Once I get the performance checked out with the new muffler I'll install the new 30MM carb and report back on the changes.
SCOOTERBOY
OK. I got the exhaust and the pipe didnt have the proper bend to it to fit on the exhaust manifold and go out through the frame as it is supposed to. After trying to make it fit I finally remounted the old exhaust the cut the muffler off were it passes just below the oil dipstick. I then cut the new exhaust pipe which is a slightly larger diameter and slid it over the stock pipe. I sealed the joint with JB Weld and bolted up the bracket and then attached the new stainless muffler to the flange of the new exhaust pipe as designed. Installation looks great and sounds killer! I havent gone for a test ride since it raining. Once I get the performance checked out with the new muffler I'll install the new 30MM carb and report back on the changes.