Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sotsma

Pages: [1]
1
Downtown 300 / Re: Vibrations front wheel
« on: August 15, 2019, 10:06:24 PM »
The bearings sould be the 6002LU = Sealed Ball Bearing 15x32x9 mm
 The 6204 are 20x47x14mm !!! none even close.


2
Downtown 300 / Re: Vibrations front wheel
« on: August 15, 2019, 07:59:48 PM »
Video not working... pictures look good. What we supposed to see?

I tested the link with 2 different pcs and looks fine !!??
What can you recommend?

3
Downtown 300 / Vibrations front wheel
« on: August 15, 2019, 06:50:52 PM »
Hi all

Today I decided to change the bearings of the front wheel, and I noticed that there is a gap between the bearing and the axle. I made a video of this. Does anyone know if this is normal?   

https://drive.google.com/open?id=15w45twTUDA4u6bkKHJK2EP4CMMwjaGoA

Thanks in advance

4
Downtown 300 / Re: Oil leak
« on: June 29, 2019, 11:10:14 PM »
Is that the water pump weep hole?.....weeping coolant and flowing to the rear, imitating an oil leak?
Or a breached seal in the water pump, mixing oil and coolant out the weep hole?
You DT owners will know.
Miles and years of this scooter?
Stig
I don't think that is the ' Water pump weep hole" , it's outside from water pump , the caps that coming out from this hole is oil not water neither mix (water & oil)
The " Telltale Hole " is on the water pump cover (as I found in service manual )

5
Downtown 300 / Re: Oil leak
« on: June 29, 2019, 04:39:20 PM »
Hi all
 I am a new rider with a DT 300i abs scouter
after about 10 days with no problems I notice oil leak under the right side near to the filter ( you can see at the photos )
I notice a little opening 8-10cm right from the filter (as you can see on the marks), I think that from this little opening came the oil.
Does anyone know why? What I must fix to stop that?

Pages: [1]