Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hatti37

Pages: [1]
1
Side By Side / 2014 Kymco 700i uxv stalls or won’t start
« on: August 28, 2020, 04:08:10 AM »
We posted about a month ago and were having some issues with our UXV cutting out at high rpms. We took it to the shop and they replaced the drive belt and set the clearances on the valves. 2 weeks and $500 later We got it back and that seemed to help the issue with the cutting out at high Rpms. In fact our uxv used to only go 45 before the rev limiter kicked in but now it goes 51 mph. Only issues is.. now the uxv stalls and or won’t start at all. It isn’t from it being hot, as it can happen after it’s been sitting for an hour an a half. Tonight I drove it hard for about 30 minutes no issues at all. Let it sit an hour and a half and it wouldn’t start (see video). It acted like it wanted to start but it didn’t. We Let it sit another hour and it fired right up. Other times we will be driving it and it will just start puttering and then die. We usually have to let it sit for some time before it will restart. It is beyond frustrating. We took it back to the shop and they said they drove it 5-7 times a half hour at a time (I call bs on that) and it never did anything we described. We have never had this issue before until we got it back after the last work on the belt, etc. any thoughts? We are getting ready to go hunting and set trail cams and don’t won’t to be stranded. I attached a video, please excuse the frustration. :'(

2
Side By Side / Re: 2014 UXV 700i Cutting out in High RPMS
« on: July 22, 2020, 11:45:29 PM »
I completely agree! It’s not that we are looking at going beyond that, it’s plenty fast enough. We are just concerned if we need to have it checked out or if something is wrong, as it hasn’t always done this, it just started last hunting season. It makes sense it’s designed to protect the engine. Is it possible the rev limiter could adjust to a tad on its own?

3
Side By Side / Re: 2014 UXV 700i Cutting out in High RPMS
« on: July 22, 2020, 09:40:26 PM »
It does not shut off, it isn't really loosing power, it is more like a interruption in the rpms... it cuts out. Not sure how else to explain it. It hasn't always done this, it just recently started. If it was a issue with the rev limiter wouldn't this always have been a problem?

4
Side By Side / 2014 UXV 700i Cutting out in High RPMS
« on: July 22, 2020, 09:33:58 PM »
We have a 2014 700i that when we have it pinned (around 42-45 mph), it cuts out. It hasn't always done that, it has recently started. We have cleaned the carburetor, done the maintenance (cleaning filters, oil change, etc) and it is still cutting out. I have heard about a rev limiter, the manual in cyclepedia.com does not indicate where the rev limiter is. Can anyone tell us where this is and provide any additional ideas on what to troubleshoot?

Super frustrated, few people in our area will service Kymco anymore because Kymco is hard to get parts from, etc. Thank you for your help!!!

Pages: [1]