Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Corp_T

Pages: [1]
1
Agility 125 / Re: Kickstand
« on: July 14, 2011, 12:21:59 AM »
that's all it was. A stand, a spring, and a bolt. Really easy to install, would have been easier if I used a pair of pliers to pull the spring instead of re-purposing tools.

2
Agility 125 / Re: Magnetic oil plugs
« on: July 09, 2011, 01:01:35 PM »
Generally it's just a drain plug that has a magnet built into it. It'll catch small particles of metal shavings from the metal on metal contact that inevitably happens in an engine. A oil filter is good, but it never hurts to have something like this. When you change the oil you just wipe the plug off and you're good. Sometimes small or even large metal shavings will either pass through the filter or even tear it, it's just cheap insurance against that.

3
Agility 125 / Re: Kickstand
« on: July 08, 2011, 09:39:38 AM »
I just hate putting down the center stand so I can throw the trash away and be back on it 2 seconds later. But yeah, I contacted the dealer and it turns out the kickstand was "sitting in the back" not sure what that means since I think it generally comes installed on the scooter. Either way they're shipping it to me. Thanks for the heads up that it's standard.

4
Agility 125 / Kickstand
« on: July 06, 2011, 11:20:12 PM »
Ok, I just bought my 2009 Agility 125cc on Saturday and it has a center kickstand. Is it also supposed to have the side kickstand as well? It's kinda a hassle to use the center stand when I'm just going to be off it for 20 seconds and where I'll be parking at work they have plates on the ground for kickstands.

5
I just bought mine this weekend and they had that same problem with mine while they were checking it out. Turns out it was something in the Carb. They spent the better part of 2 hours trying to troubleshoot it and they ended up replacing it as a warranty item.

Pages: [1]