Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - adamsd11

Pages: [1] 2
1
Agility 50 / Re: 57MPH Tops.
« on: November 30, 2011, 10:48:34 PM »
Quote from: kanbisk on November 24, 2011, 08:03:17 PM
Hi,
What is that you are trying to do? Faster take off or top end ?

There is lots of ways of doing it, shade some light on it.
Cheers mate

Right so basically, last week was a bad time for my agility! Basically the backwheel started making a noise asif the wheel bearings had worn. However it turns the main bearings in the engine has gone.

I have 2 Agilitys and ones a 80cc so in a moment of madness i decided to take all the stuff off my old agility and put it on my 80cc.

My 80cc has a race variator on and the cut cdi and a new drive belt. Ive also cut the boss drive and put my weights in from the other scoot. Ive left my LeoVince off my newone for the time being and im really happy with my decision to use my 80.

Basically tonight i swapped everything over and went out with my mate whos ped is really fast. in the 80 the acceleration is a lot better, this may not be the kit thats done this but in comparison it seems it!

So tonight i went down the long downhill again. There was 3 of us, a lad who has an aerox that does 51 and a lad that has never hit top speed. My ped came down the hill with the speado directing at my 2/3 number in on my speado. About 59/60mph. My friend overtook me near the bottom and on his aerox his speado the neadle was at the "P" of "Temp" on his clock about 63/64mph. As i looked up my mate was only half way down, which led me to believe the speados wernt lying.

Thinking about a Spark Coil an orange race one. For a little bit more top end.

Ill try to get a video of a helmet cam soon so you can see my speado and decide for yourselfs, however i carnt wait to put the leovince and get a few more MPH's!!

Any other ideas?
Regards

2
Agility 50 / Re: 57MPH Tops.
« on: November 20, 2011, 10:47:54 AM »
Alright lads, got a bit of money spare and thinking of maybe a few mods!

My friend has got a 59 aerox and recently put a bigger carb on it, it took a lot of tweeking and setting up however it flies and leaves me at about 52 on flat. He paid £1450 for his aerox and i paid £160 for the agility and up to last week i was beating him!

What your opinions on Race clutchs? it wont improve the top end however with my kymco being four stroke its totally rubbish on take off.

What about a new coil? Any reviews on this
http://www.ebay.co.uk/itm/Kymco-Like-4-Stroke-50cc-Racing-HT-Lead-Coil-Cap-/270805279017?pt=UK_Motorcycle_Parts&hash=item3f0d40a129#ht_1406wt_932

also looking at a variator plate as hopefully it will work well with the race variator already in mine.
http://www.ebay.co.uk/itm/Kymco-People-S-50cc-HS-CNC-Variator-Plate-/270805287231?pt=UK_Motorcycle_Parts&hash=item3f0d40c13f#ht_1331wt_932

I think im going to put the standard airbox back on and change my jet to about an 82/84.

Any other reviews you've got?

cheers!

3
Agility 50 / Re: 57MPH Tops.
« on: October 11, 2011, 10:28:08 PM »
Belt is standard, the variator is a "Race variator" from ebay, i will post a link tomorrow.

4
Agility 50 / Re: 57MPH Tops.
« on: October 11, 2011, 10:16:42 PM »
Yeah im running an 88 main jet. The scoot does alright.

The kymco currently does 57mph down a hill. It is in the middle of my last 2 digits of my millage clock, the reason i know its 57 is because im 16 and theres a few of us that go out. My friend has a gilera DNA 50 and his speado reads 57mph when hes in like with me.

I want to get a little bit more, wondered about performance parts?

I will try take a picture next time im flat out for you :)

5
Agility 50 / 57MPH Tops.
« on: October 10, 2011, 09:56:36 PM »
Right ive done some more to my kymco and she now does 57mph down hill (this is the best I have got so far)

To get my ped to do this ive
- Cut the CDI
- Leovince Pipe
- 5.5g Rollers
- Cut the boss drive
- Race Variator

P.S The ped is still a 50. It doesnt have a 80cc/90cc kit fitted

What else can i do to get more out of it? Might try 5g rollers? The ped seems to be rubbish up hill! Any other tips, recomendations of other parts i should get?

6
Agility 50 / Re: 80cc big bore popping noise???
« on: October 10, 2011, 09:52:10 PM »
mine did this, i installed a "race variator" cut the cdi and brought new rollers now mine does 57mph down hill 52on flat. it doesnt make the noise anymore but i thik the noise will come back when i have run the variator in.

The noise is when youve hit top speed. I dread hearing it because then i realise i cannot go no faster

7
Agility 50 / Re: Just got an Agility 50
« on: August 16, 2011, 10:29:37 PM »
Yeah my peds just have redone their M.O.T's so they all have good tyres atm.

What do you suggest to run the 80cc bikes? air flter, main jet wise?

im going to look into getting a full race variator as ive seen them and they look like they could do alot :D

8
Agility 50 / Re: Just got an Agility 50
« on: August 15, 2011, 10:27:08 PM »
im not sure what size and yeah it was the boss, my dad cut it and its the same size as they all show on the youtube videos? i used one of them to do it. and i have 2 kymcos with the 80cc's but it doesnt seem to make a difference. I was thinking maybe K&N Filter? Bigger Main Jet? New race clutch and carb?

Any other recomendations?

9
Agility 50 / Re: 23mph tops, what can I do?
« on: August 14, 2011, 11:10:23 PM »
One of mine did this! i kept pushing it and it hit 35mph with CDI cut. Decided to take it to peices and i had blown a 'O Ring' so i brought new piston and rings. 42mph easily ever since and feels dead smooth

10
Agility 50 / Re: Just got an Agility 50
« on: August 14, 2011, 11:03:45 PM »
Ive brought new rollers, cut the CDI and cut the variator. My ped now hits 49mph but no matter what hill it will not hit 50!

Im looking at more mods like, race clutches, race carbs, k&n air filters. Will this change anything? im 16 and all my mates have 2 stroke hairdryers (Airox's, speedfights, nrg's, sr50's) and i want to prove that a kymco can hit around 60mph. Im from the uk so i need uk sites...

any ideas how to get an extra 10mph?

11
Agility 50 / Re: Just got an Agility 50
« on: July 08, 2011, 10:57:51 PM »
Hi again guys, going to pick up my 3rd tomorrow. Officially got the bug. The first Kymco that was hesitant had blown gaskets so the oil was leaking. That is going to be fixed within the next month. :)

12
Agility 50 / Re: How to De-Restrict
« on: July 03, 2011, 07:57:33 PM »
Cutting the CDI is such an easy way and will open your kymco up and lets it rev alot higher.
All you need to do is go to the bottom of the CDI (the opposite side to the green part) make a small saw about a quarter of an inch. If you search it in the bar at the top of the window someone has done one taking pictures. Also the LeoVince exhaust has helped mine on acceleration however its £105 well worth it though in my experience.

13
Agility 50 / Re: Just got an Agility 50
« on: July 03, 2011, 12:30:51 AM »
Thanks for all your help so far guys! My dads got the bug now and we have just brought a 2nd Agility 50! I must say the leovince exhaust seems worth buying! It makes the bike sound so much better and performance! i will upload pictures soon!

14
Agility 50 / Re: Just got an Agility 50
« on: June 27, 2011, 02:23:30 PM »
So the lighter rollers the faster acceleration? and the heavier the rollers the better top spead?

I was on it last night and got the bike up to 38mph on the speado but then i had to brake into a corner. The only thing i have done on the bike is the Cut on the CDI Unit?

Whats the best youve got out of yours, with the mods on it and what mods have you got. The variator looks good and will probs get that. still like the sound of 80cc kit aswell? Cheers

15
Agility 50 / Re: Just got an Agility 50
« on: June 26, 2011, 06:16:57 PM »
ahh thanks mate. Have you got links to any website you can get the parts from? Like the rollers? Cheers

Pages: [1] 2