Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jasony

Pages: [1]
1
Agility 50 / Re: agility 50 HELP
« on: January 21, 2012, 01:33:31 AM »
hey scootrus  what are the colors they connect to i can make some of the blacks out

2
Agility 50 / Re: agility cdi box WANTED
« on: January 20, 2012, 03:02:17 AM »
agility 50
dc big box
dont make any difference long as it is good

3
Agility 50 / Re: agility 50 HELP
« on: January 20, 2012, 03:01:09 AM »
ok cool thanks i beleive there right   
i think i have a bad original cdi  DC big one
went to a scooter shop and i didnt know there was a AC one
i had them check it on a scoot that had same box SMALL one

it fired theres so i brought home and plugged in mine and it fried it..
so after reading tonight i see kymco,s take DC cdi so im gona try and find one tomorrow

Any one know if the pulser wire sends a ground signal to the cdi ?
as thats what im gettin out of it unplugged and at the box..

i have 1 igniton switched hot black blue
ground GREEN
blue yellow pulsator wire sending a ground circuit
everytime magnet passes while cranking
and have black yellow which isnt getting anything coming out of cdi

therefore beleve the cdi was bad just got f***ed by the shop as they didnt know there are 2 boxes either..
i do know

4
Agility 50 / agility cdi box WANTED
« on: January 20, 2012, 12:16:48 AM »
Any one have a cdi box for sale ?
im in northern ky

5
Agility 50 / agility 50 HELP
« on: January 19, 2012, 11:03:38 PM »
ok guys i have a 09 50  that i bought with some cut wires <was a theft recovery>
i ve downloaded the wiring diagram and re wired what i believe to be is correct
been over it hundred times   i keep burning up cdi boxs... gettin to point where my head hurts and wallet is
starting to hurt id love to get this thing running   i just need spark...

i need some pics of the ignition switch connector to the main harness so i can check mine is corret as they cut the conector out

also i need some one with a test light or meter to check what they have down at there cdi connector 
by the looks of the wiring mine is all correct im getting pulse to the cdi and i have power there but i cant get a hot to the coil..
something is burning the cdis up soon as i install them and i cant find it ... any help thanks

any one have a wiring harness key switch and a cdi from a 50 for sale?? last resort
502 690 1117 call or text

6
Agility 50 / Re: 50 wiring help
« on: January 17, 2012, 05:57:16 PM »
thanks for help guys anyway some one can email me something   i cant download any of them wife will kill as computer crashed last time i did something like that ..lol      or can any one take there front panel off and snap a pic?? dying to get this thing going..lol

7
Agility 50 / Re: 50 wiring help
« on: January 17, 2012, 08:37:05 AM »
or if some has the wiring diagram or manual   i cant get one to download on my computer
you can email it to me at turbostangvert@yahoo.com

8
Agility 50 / 50 wiring help
« on: January 17, 2012, 08:28:32 AM »
just picked up my first agility 50 scooter from prevouis owner was a theft recovery need some wiring help
igntion switch is still intact with 6 inch of wiring  they cut the connector off that plugs in the the main harness
i have on the switch side
red
green
green
black
black/white

on the harness side
red
green
green
black blue
blue yellow           

need to know what to connect these to and how to test the cdi box as i am assuming that they fried it
thanks any help apresciated

Pages: [1]