Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - xhellmanx

Pages: [1]
1
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 25, 2012, 09:29:36 PM »
Mate I cleaned the spark plug and pulled the head thing off that the spark plug is screwed into. Wire brushed all that up. Cleaned the foam from the air filter and also put a hose back on that fell off a while. This hose is about 8 cm long and 3 cm in diameter. I think it's some sort of air hose. Anyways put all the bits back together and scooter is running smooth as again!!! It's fixed. For now anyways. Thank u so much for all ur help. I really appreciate it. Cheers

2
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 24, 2012, 08:03:25 AM »
Just cleaned the spark plug and air filter. Now just sitting on the stand and putting it on full throttle it cuts in and out. Like goes full power then cuts down then picks back up.

3
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 24, 2012, 06:24:31 AM »
Also where is the auto Marie choke on this thing.

4
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 24, 2012, 06:23:35 AM »
Just pulled the scooter apart. Would the fact that the air filter foam having oil al over stopping air flow to the moter cause this problem?

5
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 24, 2012, 05:10:47 AM »
Ok. So would thy explain why when the bike starts and it's cold it's good and runs well with full power then all of a sudden its power drops out and there is none

6
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 24, 2012, 01:46:28 AM »
What is compression test tested on. Like what part of the bike

7
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 23, 2012, 08:38:39 PM »
I don't know how to check all that stuff haha. As I said I'm a major noob when it comes to scooters. Ok it take about 5 mins to get it started the first time. Then u can turn it off and start it straight away after that. It's not just under pressure. It's basically when it's warmed up after about 5 mims of riding it. So after 5 mins of riding it,it will be at full throttle (not full speed) and all of a sudden all power just dies. It takes between 20-30 seconds for complete power loss. While I'm still holding the throttle on full the bike isn't moving but it hasn't turn off. Maybe it's getting too much oil or something? It has 4778 kilometers on it

8
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 23, 2012, 04:55:55 AM »
Btw I really appreciate u trying to help me.

9
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 23, 2012, 04:55:30 AM »
Would the fact it was marine grade oil he put in it screw the scooter?

10
zx50 / Re: PLEASE HELP!!!!! NOOB IN NEED
« on: February 23, 2012, 01:17:03 AM »
My dick head brother put marine oil in it. Would that effect it? How do I compression test it. An if it is what u said is it worth fixing

11
zx50 / PLEASE HELP!!!!! NOOB IN NEED
« on: February 22, 2012, 08:49:19 PM »
my vibe 50 2t is totally failing. Strays perfect every time no problem. Could idle forever if I wanted it to. The problem starts when I put pressure on the bike. Eg; going up a hill. Two people on it. I'll have it on full throttle and it will b all good. Then go up a hill and it just slowly Boggs out. Within 30 seconds it's bogged to a stop (still running) still on full throttle but the bike has no power and is making a rank bogging noise. Still idles fine after this.

12
I have the same problem with my vibe. Except mine doesn't cut out. It will idle all day long no probs. it runs perfect for about 5 mins. Or until I go up a hill or something. Then it Boggs to an idle and doesn't get any throttle at all. Just idles. If I do give it some gas it just makes a rank bogging noise and doesn't move. Turn it off let it cool off for a couple or hours then can ride it again for 5 mins. Please help!!!!!!!

Pages: [1]