Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - philipgunter

Pages: [1] 2
1
zx50 / Re: Handle Bars ?
« on: May 28, 2012, 02:43:43 AM »
yes i see about the headlight i will study what i can do for this first task.
this may take some planing.
Thank You.

2
zx50 / Re: Handle Bars ?
« on: May 28, 2012, 02:28:54 AM »
Yes something like that  :) just not sure how to get started.

3
zx50 / Handle Bars ?
« on: May 28, 2012, 12:38:29 AM »
Hello Everyone,
Im hopeing it get some info on a handlebar replacement for a zx 50 super fever after getting the spark problems fixed in my last post. ok here is my problem the handlebars have a good amount of rust going on. and the plastic parts are broken in a lot of places where the front and back that go around the handle bars. how hard would it be to put a set of  new bars on and just hook up a single speedo on the bars ? and not put all the plastic back on and do away with the Kycmo speedo.


Thanks everyone.

Philip

4
zx50 / We have Spark!!
« on: May 11, 2012, 11:54:43 PM »
Hello Everyone,
I just had to post the news and thank everyone who worked with me on my no spark problem ;D i came across a guy i work with and was telling him about the no spark problem when he told me had a 6 Pole magneto stator for a scooter he had sold about a year ago i asked if he still had it and he said yes. he wanted $10 for it and he brought it to work  ??? the box is labeled  ( 6 pole magneto stator gy6 150cc) i told him i don't think this will work because my scooter is only 50cc boy was i amazed the stator is a perfect fit! the pulsar coil i had to drill the holes a little bigger for the bolts holy crap i put it together and hit the stater button the spark was wicked from the plug i turned it loose very fast was like sticking a finger in a wall outlet. anyway were running again thank you to everyone.

Philip 

5
zx50 / Re: CDI Question
« on: May 10, 2012, 12:19:48 AM »
Thank You it's looking like a stator more and more :D thank you for your time and testing this out for me.

philip

6
zx50 / Re: CDI Question
« on: May 10, 2012, 12:07:36 AM »
Hi Shaka,
Just did the test with Key on head light turned in and gave the kick start a workout not even a dim flicker so just to be sure i unplugged the light and hooked a volt meter to the wires no movement  :-[ but thank you for the idea to try.

Philip

7
zx50 / Re: CDI Question
« on: May 09, 2012, 03:26:50 AM »
 ;D Thank you Shaka i will test this right after work on Wed and post what i find out. at this point i will check anything out  ;D

Thank You again
Philip

8
zx50 / Re: CDI Question
« on: May 09, 2012, 02:34:17 AM »
Thank you everyone im going to find a stator & a CDI i think this is the best way to go:) i will post the outcome.

Thanks again

Philip

9
zx50 / Re: CDI Question
« on: May 09, 2012, 01:32:52 AM »
Hello Zombie,
I just went out and switched the Blue and Yellow no luck i put the old cdi on and switched it also no spark ? do you think the new cdi i got is bad ? maybe i should try to get another one ? and what is your thoughts on the stator? should i track one of those down also:) any input you could offer me.

Thanks
 Philip

10
zx50 / Re: CDI Question
« on: May 09, 2012, 01:06:00 AM »
Hello Zombie,

Yes i did switch the Blue and Yellow as you talked about in one of the post you send me there was no change  ??? any I do have the Blue cdi with heat sink. I just checked again now that it dark outside and should see a spark but there was none.
Here is how it is hooked up right now.

CDI                                   Scooter
Red                                   Black/Red Stripe
Black                                 Black/White Stripe
Blue                                  Blue/Yellow Stripe
Green                                Green
Yellow                               Black/Yellow Stripe
:) Guess i need a 24 Volt Battery just kidding. This is Crazy but im going to beat it.

Thank You
Philip 

11
zx50 / Re: CDI Question
« on: May 08, 2012, 09:53:39 PM »
Thank You i will post this is not going to beat me ! The stator is a 6 pole do i need the same part number or is there one from a different scooter that will fit ?

Thanks philip

12
zx50 / Re: CDI Question
« on: May 08, 2012, 09:12:26 PM »
No but i do now  ;D thank you.

Philip

13
zx50 / CDI Update but still no spark?
« on: May 08, 2012, 06:56:44 PM »
Hello Everyone,
after taking all the info from this post i started i am down to still no spark so let me post all i have done :)

New - cdi
New - Plug
New - coil
checked the ground wire to starter.
checked the green wire going into cdi.
checked connection to cdi all are no good.
 ;D Held spark plug in hand while trying to start it no shock to me :)
checked kill switch it is good.
But there is some good news the Green led on the cdi box does flash when i try to start it. not bright But it does flash. so this is where im at no spark at plug.
clipped Black and red wire at cdi did not work so i hooked it back up.
Any ideas will be checked out?


Thank You
Every one for all your input.  

14
zx50 / Re: CDI Question
« on: May 08, 2012, 01:39:46 AM »
Hi zombie,
I did check the kill switch with a meter when i pressed it the meter went on and off so i guess this part is ok :) as far a spark plug i have not held it in my hand :) should i stand in water for this test  ;D just kidding but you did talk about the green wire on the starter that seems to be on very well. is there a chance when i turn on the key switch it mite not be making contact ?  is there a way to test this switch ?

as always thanks for your help.
 Philip

15
zx50 / Re: CDI Question
« on: May 08, 2012, 01:10:34 AM »
Thanks zombie,
But no matter what i try i just cant get spark to come out of the plug:) maybe i should just torch the scooter :) i did the pulser coil test also read was 150 ohm the only parts i have not bought now is a stator and pulser coil and a ignition switch. and a new wiring harness. are there any hidden fuses switches.


Philip 


 

Pages: [1] 2