1
Agility 125 / Re: New scoot owner. 125madness
« on: March 06, 2014, 02:54:28 AM »
Pick up a dr pulley variator and you will increase your top end
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Agility 125 / Re: Need A New Seat
« on: January 15, 2014, 02:43:40 AM »
I got one in good shape that I don't need
700 miles on it
700 miles on it
3
Agility 125 / Re: Winter Driving
« on: December 21, 2013, 01:21:15 AM »
I don't think this is a "problem" with the scooter, but actually quite common.
I had to kick start my 125 when it got below 50 degrees
It probably just needs slightly more gas, so either adjust the a/f mix and maybe the idle as well.
You could always buy the 38 sj from scrappydogscooters as well
I had to kick start my 125 when it got below 50 degrees
It probably just needs slightly more gas, so either adjust the a/f mix and maybe the idle as well.
You could always buy the 38 sj from scrappydogscooters as well
4
Agility 125 / Re: Loose assembly on right handlebar
« on: November 06, 2013, 11:45:22 AM »
Unscrew the other screw a little as well. It could be too tight and squeezing too much and throwing off the angle of the bottom mount
5
Agility 125 / Re: Question on Air Box Removal/ Torque Spring vs Roller Weight Size/ Stock Tires...
« on: November 06, 2013, 11:43:17 AM »
I did the dr pulley variator with 12 g sliders and 1500 clutch spring
The spring is important in keeping this variator in the power band and it has smooth acceleration right on through. How much do you weigh?
I also installed a 42mm polini cone filter, which was foam but covered by plastics to keep it relatively dry. I messed around with all types so jetting, but found the stock jetting to work the best. Once the weather turned a little colder, I was going to up jet the slow jet to 38 but my scooter got run over in the parking lot at work and was totaled.
The spring is important in keeping this variator in the power band and it has smooth acceleration right on through. How much do you weigh?
I also installed a 42mm polini cone filter, which was foam but covered by plastics to keep it relatively dry. I messed around with all types so jetting, but found the stock jetting to work the best. Once the weather turned a little colder, I was going to up jet the slow jet to 38 but my scooter got run over in the parking lot at work and was totaled.
6
For Sale / Re: WTB - Right Mirror for Agility 125
« on: October 22, 2012, 01:53:05 PM »
I got a black right side mirror, just rocking the left side for now-
paypal is einsiedler3@yahoo.com
will ship out within 12 hours of paypal
please put address in paypal notes section
thanks!
paypal is einsiedler3@yahoo.com
will ship out within 12 hours of paypal
please put address in paypal notes section
thanks!
7
Agility 125 / Re: Headlight switch / bulb issue
« on: October 13, 2012, 12:47:59 AM »
So the current electrical can handle 55w no prob?
Just wondering because the stocker is pretty weak
Just wondering because the stocker is pretty weak
8
Agility 125 / Re: Changing the final gears 2013 agility 125
« on: October 12, 2012, 03:03:47 AM »
Doesn't sound like this guy is looking to lose top end
Anyways-anyone done a final gear swap on the A125?
Anyways-anyone done a final gear swap on the A125?
9
Agility 125 / Re: Yet Another Tire Question
« on: June 27, 2012, 01:16:13 PM »
^^^^
questionable math-
the 130 is wider than the 120
questionable math-
the 130 is wider than the 120
Pages: [1]