1
Eye Candy | Videos and Pics / Re: My 08' Kymco Agility 50
« on: July 11, 2012, 04:51:57 AM »
im looking at a Roketa Mc-23 150cc scooter, they look pretty nice and i found them for a good price on a website.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Eye Candy | Videos and Pics / Re: My 08' Kymco Agility 50
« on: July 11, 2012, 01:55:00 AM »
Cleaned out the carb, changed the gear and motor oil, air hosed the transmission and case off Filled up the tank. Only getting about 37-40MPH on flat land. I thought i was going faster but my speedometer is incorrect. I verified my speeds with the GPS today. Im trying to make up my mind with what i want to do with it. i was thinking about selling it and buying a 150cc. Its still up in the air ill keep you guys posted!
3
Eye Candy | Videos and Pics / Re: My 08' Kymco Agility 50
« on: July 10, 2012, 01:50:15 PM »..i had the worst luck and performance from an ncy kit...
..get you a malossi multivar, a malossi 1500 torque spring, and some 1000 or 1250 clutch fly springs...
..find you an oem bando belt..
..some 5.5 gram malossi rollers, and you gonna love that lil scoot...
where do i buy those parts>?
4
Eye Candy | Videos and Pics / Re: My 08' Kymco Agility 50
« on: July 09, 2012, 04:18:52 PM »
Its a 2009 but it was manufactured in 2008. Maybe ill go with just a basic roller kit first before i go to sliders like you say. Thanks for all your help ill be posting in a week or so with new pics so check back often!
5
Eye Candy | Videos and Pics / Re: My 08' Kymco Agility 50
« on: July 09, 2012, 01:25:59 PM »
Ok so the 1500rpm torque spring comes with the NCY Transmission kit so i will be getting one of those as well.
i will pass on the kevlar belt and get another OEM one.
Didnt think the tires looked that bad but i can get new ones if i have to!
I want to get some Dr. pully sliders but not sure what weight i should use? im more interested in more power up hill then i am worried about over all top speed.
I plan on Going through the scooter and making sure everything is safe and secure but i have already been running at WOT with no problems. but i do understand where the concern comes from so i will be stripping everything down in the near future and cleaning everything up. Ill have pics up soon as parts come in!
i will pass on the kevlar belt and get another OEM one.
Didnt think the tires looked that bad but i can get new ones if i have to!
I want to get some Dr. pully sliders but not sure what weight i should use? im more interested in more power up hill then i am worried about over all top speed.
I plan on Going through the scooter and making sure everything is safe and secure but i have already been running at WOT with no problems. but i do understand where the concern comes from so i will be stripping everything down in the near future and cleaning everything up. Ill have pics up soon as parts come in!
6
Eye Candy | Videos and Pics / My 08' Kymco Agility 50
« on: July 09, 2012, 04:19:58 AM »
Just picked up this bad boy for 500 bucks. Drove it 29 miles home right after i bought it. Its in rough shape but it made it back i was surprised and pleased. Granted i was only going 10-15 mph up hill at some points.
I did the CDI modd http://www.scootertherapy.com/cdiboxcutpage.html to it today and helped get a few more MPH but still is very sluggish up hill, looses power fast.
What it needs...
Front Right Bulb for signal blinker
Rear Brakes
Front Brake Pads
A few body plastics (already found them cheap on eBay)
Carb needs to Be cleaned
Transmission needs to be tuned up
Thinking about buyin a few things for it, heres what i have in mind.
NCY Transmission Kit
Kevlar Belt
Oil Cooler
Uni Air Filter
Fuel Filter
No Rev CDI
Spark Plug
Ignition Coil
Performance Exhaust
I eventually want to get a slightly bigger carb, not huge just like a 19 or 20mm. Would That be ok if it was properly jetted?
Pics!!
I see these things at motorcycle dealerships between $1200 and $1900 so i think i got a pretty good deal. Thanks for looking any suggestions or tips would be great this isnt my first scooter but i am new to the hobby and can use any help i could get.
I did the CDI modd http://www.scootertherapy.com/cdiboxcutpage.html to it today and helped get a few more MPH but still is very sluggish up hill, looses power fast.
What it needs...
Front Right Bulb for signal blinker
Rear Brakes
Front Brake Pads
A few body plastics (already found them cheap on eBay)
Carb needs to Be cleaned
Transmission needs to be tuned up
Thinking about buyin a few things for it, heres what i have in mind.
NCY Transmission Kit
Kevlar Belt
Oil Cooler
Uni Air Filter
Fuel Filter
No Rev CDI
Spark Plug
Ignition Coil
Performance Exhaust
I eventually want to get a slightly bigger carb, not huge just like a 19 or 20mm. Would That be ok if it was properly jetted?
Pics!!
I see these things at motorcycle dealerships between $1200 and $1900 so i think i got a pretty good deal. Thanks for looking any suggestions or tips would be great this isnt my first scooter but i am new to the hobby and can use any help i could get.
Pages: [1]