Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - LewisKA50

Pages: [1]
1
Agility 50 / Re: ..stock variator drive boss..
« on: May 26, 2013, 05:29:27 PM »
..i found this waay back in this board...modified it somewhat, but its pretty much straight forward...


..basic instructions for replacing the oem restricted drive boss: 1-Remove bolts (8mm socket) from the cvt cover.. 2-Remove hex nut (17mm socket) from splined crankshaft... 3-Remove machine washer, the splined adapter, cooling fan and outer half of drive pulley (drive face)...4-Remove drive belt from shaft (drive boss)  5-With left your hand, push inner half of pulley (movable drive face), and with your right hand remove the drive boss from the shaft... Be sure that you hold the inner pulley half securely to insure that the roller weights remain in their proper position (they could fall out)... 6-Insert new drive boss onto splined shaft and into the moveable drive face.. 7-Install belt...  8-Install drive face, fan, splined adapter, washer and hex nut..(add a bit of blue Lock-Tite)  9-Install cover...

..enjoy the increase in performance!!!


peace

This sounds quite complicated is there a video? What would happen if you cut the CDI box and didn't change the drive boss?

2
Agility 50 / Re: CDI Modification
« on: May 26, 2013, 04:53:25 PM »
You will have to change out the drive boss and a bigger main jet.

I see, is that expensive?

3
Agility 50 / Re: CDI Modification
« on: May 26, 2013, 09:53:15 AM »
Cut CDI just did mine got 5-7 mph out of it!

Do you just have to cut it and that's it? Or do you have to change something's?

Cheers.

Pages: [1]