1
Agility 50 / Re: Another derestricting the Agility
« on: June 14, 2009, 07:55:11 PM »original are 6.5 g
go for 6.0 ( mine are 5,8 )
i bought 5.5. grams.
im rolling happy.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
i bought 5.5. grams.
im rolling happy.
3
Agility 50 / Re: More power to go up a hill?!?
« on: May 14, 2009, 10:26:13 PM »
i just bought some lighter variator rollers.
5.5g. (JASIL top racing rollers)
it´s a all new scooter.
with my light weight (65 kg):
much more agressive, great aceleration, i have a smaal hill just outside my house , and it could not go further than 30 km/h, now it goes 40 km/h.
just love the way the scoot behaves now.
the top speed did not decrease as i have read somewhere.
the lighter rollers do not decrease top speed, they just give more aceleration.
the scoot just boost up right away.
glad i got them.
5.5g. (JASIL top racing rollers)
it´s a all new scooter.
with my light weight (65 kg):
much more agressive, great aceleration, i have a smaal hill just outside my house , and it could not go further than 30 km/h, now it goes 40 km/h.
just love the way the scoot behaves now.
the top speed did not decrease as i have read somewhere.
the lighter rollers do not decrease top speed, they just give more aceleration.
the scoot just boost up right away.
glad i got them.
4
Agility 50 / Re: My hand - made distancer
« on: May 07, 2009, 02:26:08 PM »
cool! 
nice lookin bike!
teel me somethin agil, is that an free flow air filter right?
wich size should i buy?
i really like the look of it, i hate the original one.
can it be changed with no problems on my agility?
it wont mess with performances, or ruin anithyng?
nice lookin bike!
teel me somethin agil, is that an free flow air filter right?
wich size should i buy?
i really like the look of it, i hate the original one.
can it be changed with no problems on my agility?
it wont mess with performances, or ruin anithyng?
5
Agility 50 / Re: Derestricting your Agility CDI
« on: April 24, 2009, 10:25:48 PM »the screw in the exhaust pipe just went off the bike (hope i did not kill anyone), it was just hand-screwed.
anyone knows just what that screw does?
i replaced it with new one.
anyone?
6
Agility 50 / Re: Another derestricting the Agility
« on: April 24, 2009, 10:15:19 PM »original are 6.5 g
go for 6.0 ( mine are 5,8 )
6 it is.
i´ve been readind that for most 50cc scooters a 4.5 or even 4 works the best.
is this bike more cause of the 4 stroke sys?
i just went for a ride, and got to 75 km/h with my 62 kilos on the bike, a bit windy.
not aiming for more speed, i think its enough for my drivin expertise, but it takes a while to boost it up.
so i am aiming for great acelleration.
i´ve herd about a screw on the carb that did not let something to oppens fully, can u explain that to me?
thanx a lot m8.
7
Agility 50 / Re: Another derestricting the Agility
« on: April 23, 2009, 07:42:27 PM »
ok then. 
lighter variator rollers will gimme more aceleration right?
what is the weight of the original?
heard that most 50cc willdo good with 4.0g rollers.
lighter variator rollers will gimme more aceleration right?
what is the weight of the original?
heard that most 50cc willdo good with 4.0g rollers.
8
Technical | How To / Re: agility 50 exhaust pipe
« on: April 22, 2009, 09:41:38 PM »
ok, i understand.
in a 4 stroke it does not help ya much.
thanx a lot m8.
is ti hard to change the jet on variator?
in thermos of desasembly of bike/ carb etc?
haven´t got to many pictures of it, so im a little shaky...
in a 4 stroke it does not help ya much.
thanx a lot m8.
is ti hard to change the jet on variator?
in thermos of desasembly of bike/ carb etc?
haven´t got to many pictures of it, so im a little shaky...
9
Agility 50 / Re: Another derestricting the Agility
« on: April 22, 2009, 09:38:51 PM »
an u help me with the replacement of the jet?
i got an k82 jet to put in the bike, but im totally noob...
.
i think the one in the bike is smaller right?
did the cdi and variator bush mods, its going 70km/h +-.
how do u replace the main jet?
the exausth pipe... can we do something to make it more efective? is it also retricted?
thanx m8.
i got an k82 jet to put in the bike, but im totally noob...
.i think the one in the bike is smaller right?
did the cdi and variator bush mods, its going 70km/h +-.
how do u replace the main jet?
the exausth pipe... can we do something to make it more efective? is it also retricted?
thanx m8.
10
Technical | How To / Re: agility 50 exhaust pipe
« on: April 22, 2009, 07:36:38 PM »I belive your agility 50 is a 4 stroke and the exhaust is not one of the more effective ways to de-restrict it . You could read some of the previous postings in the "agility 50" heading on this forum to find more information . Good luck .
weel i have made de cdi and boss clutch on variator, i was aiming for something more, not feeling confident about changing the main jet as i know little or nothing bout mechanics and im little bit scared...
what i mean is if i could make the original exhaust give a little more without buying a new one.
11
Technical | How To / agility 50 exhaust pipe
« on: April 21, 2009, 05:24:45 PM »
is the exhaust restricted?
is there a way to un-restrict it?
is it worth it?
thanx in advance.
is there a way to un-restrict it?
is it worth it?
thanx in advance.
12
Agility 50 / Re: Derestricting your Agility CDI
« on: April 20, 2009, 11:20:35 PM »
well today i took it to a long road, and the little devil just kept on running till 70 km/h, wich surprised me to be honest.
and i think it could co further, but the stop sign did not let me go any further...
at 70 km/h the screw in the exhaust pipe just went off the bike (hope i did not kill anyone), it was just hand-screwed.
anyone knows just what that screw does?
i replaced it with new one.
and i think it could co further, but the stop sign did not let me go any further...
at 70 km/h the screw in the exhaust pipe just went off the bike (hope i did not kill anyone
), it was just hand-screwed.anyone knows just what that screw does?
i replaced it with new one.
13
Agility 50 / Re: Derestricting your Agility CDI
« on: April 19, 2009, 06:07:34 PM »
just installed the new boss, it´s going fast and furious, 65km/h (plain ground, but did not pushed it to limit, since i just drive it in a near road, not long enough to push it further than that.)
had a rough time removing the cover thanks to the poor quality screws, one of them is just unusable.
the nut from front pulley, came out allright just with a simple key like this one (dont know the english technical therm)
had a rough time removing the cover thanks to the poor quality screws, one of them is just unusable.
the nut from front pulley, came out allright just with a simple key like this one (dont know the english technical therm)
14
Agility 50 / Re: Bag of parts in new Kymco Agility 50
« on: April 19, 2009, 02:19:45 AM »http://4tskuteri.com/smf/index.php?topic=537.0
is that that little "ring" in the last pic?
u puto on the new boss and them add that piece?
waht does it do exactly?
15
Agility 50 / Re: Derestricting your Agility CDI
« on: April 18, 2009, 01:28:08 PM »what is written on it? (example K82)
it´s written k82 like u say in.
Pages: [1] 2