KymcoForum.com

Because I don't know for sure. I took it in and they said it was under warranty so after waiting a month or so for parts they ordered it was fixed and back on the road. That was between them and Kymco.

--

Any ideas on what this current problem sounds like?

Here's my issue. It was running fine one day then the next it stopped running properly. It will crank when no one is sitting on it but any pressure pushed on it downward makes it shut off. Also when you throttle up when it's idling it starts stuttering with a drumming sound and shuts off. I decided to do an oil change and a gear oil change to see if that'd help but it didn't fix the issue. I also checked the air filter to see if it was dirty but it's very clean. What should I do next? Thank you.

My 2013 Agility 50 stopped running so I took it to the dealership for repairs. The parts are under warranty but the labor is not.. They say it's going to cost me $400 in labor to fix it. $400 is a good chunk worth of a brand new scooter. I bet I could find a slightly older model in perfect working order for the same price. What is going on?

I took the seat off to look at the engine and there's one loose tube that's coming out of the very top front. There's signs of wear and there's a crimp clip still on the end so it had to attach somewhere. I've checked everywhere online for pictures of the engine but I can't find any. This may or may not be the problem but it is an issue. Any help? Sorry no pictures.

It was raining today and on the way to work it died half a mile down the road. It was running well then I noticed I was losing power and I pulled off as it slowly died. Now it won't crank at all. The electric starter works fine but it just won't start up. Any ideas? Also the paperwork says there's a 2 year warranty. Does that include situations like this? Thank you.

I have a 2013 Kymco Agility 50 and whenever I have to ride in the rain moisture gets inside the headlight housing and the bulb burns out. I've been having this problem for 6 months or so and have gone through about 6 bulbs. At first I thought the plastic housing wasn't air tight so I applied some auto epoxy around the seam but that didn't help. I also wrapped some black tape around the wires leading to the headlight because the rubber tube around the wires would hold water inside. That also didn't help. The scooter is still under the two year parts and labor warranty so would this apply? Everything else on the scooter is like new. Even if I can't get a replacement part through the warranty is there a site that'll let me purchase the headlight housing and wires? Thank you.

My headlight keeps getting blown out when I have to drive it in medium/heavy rain. Somehow water gets behind the plastic headlight cover and the bulbs ends up cracking. Is there a way to waterproof the bulb or is there a bulb other than the S2 12v I can replace it with that isn't so fragile? Also there are two small bulbs on either side above the headlight. These have never worked. Are they supposed to and if not what are they used for? Thanks.