1
Agility 125 / Brake pads for agility city 125
« on: December 28, 2019, 07:07:06 PM »
Anyone know if the brake pads for the agility city 125 are the same back and front or if the front and back pads are different?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Agility 125 / Re: My 2011 Agility City 125
« on: May 27, 2018, 05:35:06 AM »
Standard rollers
18x14 13g
I use 10w40 semi synthetic and it's ok. Recommend oil viscosity is 5w40.
Can't help you with the pads, sorry, but Google knows everything [emoji6]
Sent from my Redmi 4 using Tapatalk
The recomended oil seems to differ based on your location probably due to climate. My recomended is 10w40.
3
Agility 125 / Re: rear oil
« on: May 22, 2018, 02:03:38 AM »i saw in the manual that the rear oil should be sae 90, but i only found sae 80, can i use sae 80? which one is better?
The best is what the manual says to put in, if you cant find sae 90 then find 80w90. Its the same stuff as far as i know and pretty common oil.
4
Agility 125 / Re: Gear oil woes
« on: April 22, 2018, 12:45:12 AM »Not "TORX">>>but torque wrench.
TORX use bits - hexagon drain bolts use sockets or wrenches.
Another bolt will not fix things as they stand.
It is VERY easy to over-torque a small bolt which is threaded into alloy metal.
Stig
It doesn't matter what you call it.
I'm talking about one of these
https://www.toolstop.co.uk/components/com_virtuemart/shop_image/product/NOR-130114-3.jpg
If the correct bit is used then you shouldn't be able to shred the bolt. I have yet to shred anything and this is the first topic iv ever seen on here regarding it so clearly not so easy. Don't over tighten.
5
Agility 125 / Re: Gear oil woes
« on: April 21, 2018, 06:14:26 PM »
I used a torx wrench every time iv changed the oil its not a problem at all. I don't know how you could even manage that the design makes that near impossible unless you used the WRONG bit.
Either way why couldn't you just replace it with a suitable bolt.
Gear oil can't burn like engine oil so the only thing that could be happening is you have a slow leak somewhere.
Either way why couldn't you just replace it with a suitable bolt.
Gear oil can't burn like engine oil so the only thing that could be happening is you have a slow leak somewhere.
6
Agility 125 / Re: 50000km
« on: December 11, 2017, 08:10:25 PM »
Thats pretty impressive i have around 6400km on mine and mine has suffered from a sticking starter relay, replace the battery and solenoid twice and it has reoccured both times so im stuck using the kick starter all the time.
7
Agility 125 / Center stand rubber stopper
« on: December 11, 2017, 08:07:33 PM »
My rubber stopper has eroded and now the bike squeeks like hell anytime i sit on it or go on a slight bump so need to replace it but cant find a proper replacement part. Does the rubber stopper for the normal agilty work on the agility city?
I tried ordering from https://www.bike-parts-kymco.uk/ but they have been a nightmare, they refuse to speak english and sent me the wrong part they sent the side stand rubber stopper instead and wont reply to emails now. (AVOID THEM!!!) Is there anywhere else i can source this part?
I tried ordering from https://www.bike-parts-kymco.uk/ but they have been a nightmare, they refuse to speak english and sent me the wrong part they sent the side stand rubber stopper instead and wont reply to emails now. (AVOID THEM!!!) Is there anywhere else i can source this part?
8
Agility 125 / Re: CDI Module
« on: June 05, 2016, 05:22:54 PM »
The agility forum does appear to be dead but there's little point bitching that no one gave you free advice, maybe no one active can help. Try scootershack forum, there are a few active spannerheads that can help with technical problems but don't expect help if you call them wankers as well.
9
Agility 125 / Re: my Kymco
« on: May 27, 2016, 08:19:56 PM »))
I have now almost 25.000 km
That's cool, do you have a list of parts you have had to replace in its lifetime? Have you had to change the variator/clutch and or rollers yet?
10
Agility 125 / Re: Wont stop cranking
« on: May 22, 2016, 09:04:46 PM »
Replaced the Chinese solenoid with a kymco people 200 solenoid and although the wire was much shorter and I had to turn the solenoid around to fit it this seems to have worked as it hasn't stuck since I fitted it 2 days ago. Also wrong shape for the rubber holder but I stuck double sided tape inside to keep it in place and all seems good so far.
11
Agility 125 / Re: which is the best brand of variator ?
« on: May 20, 2016, 01:52:17 PM »
Low weight rollers generally = faster acceleration but lower top speed. Heavier rollers generally = slower acceleration but higher top speed.
12
Agility 125 / Re: Slight popping sound On Deceleration
« on: May 20, 2016, 01:48:39 PM »
The popping sound is the sound of unburnt fuel hitting the hot exhaust pipe and exploding. Unless its really loud and or causes the bike to jolt then its not really a problem as almost all bikes do this. As for your low idle you can try adjusting the idle screw and see if that helps. If its that new surely you have a warranty on it? just have them repair/service it?
13
Agility 125 / Re: Cheap Agility 125 parts?
« on: May 20, 2016, 01:44:00 PM »
They have them on ebay.
14
Agility 125 / Re: my Kymco
« on: May 20, 2016, 01:42:15 PM »
How many miles do you have on the speedo now? or should i say kilometers.
15
Agility 125 / Re: Extra gasoline storage under the seat?
« on: May 06, 2016, 05:30:53 PM »
Well whatever you decide remember to pack your tin foil hat.