Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Rasta_scootah

Pages: [1] 2
1
People GT 300i / Re: Puig "Traffic" Windscreen , ...
« on: July 27, 2016, 10:48:35 PM »
 :)    Hey Guys , ... I'm sorry I've been absent on here for a while ( been riding .... ) , ... Here's the Puig Traffic Windscreen I ordered thru Racing Planet USA , 915 Doyle Road  , Suite 303 , Deltona, Fla  32725 , ... It's the smaller size & I can see right over the top of it  , ... I think I paid about $130  , ...

2
People GT 300i / Puig "Traffic" Windscreen , ...
« on: June 28, 2016, 12:48:30 PM »
Hey Guys, ... I just received the new windscreen  ( Stock Photo )  ( haven't installed it just yet ) , ... and was curious if anyone else is running this same windscreen on the GT300i  ??    Any Product Reviews ??

3
LIKE 200i / Re: Cellphone Charger Fuse Info , ... ?????
« on: February 24, 2016, 12:51:39 AM »
Okay  ,  here's what's been done , .... There's a pair of 3/4" Blue LEDs on the Glove Box Door , powered by the Phone Charging Port ,  so they could be unplugged , ... these are on when the engine is running , .... Then there's a pair of those same lights under the bike ( front & rear ) wired right off the battery with a switch along with a pair of Blue & White LED Strips ... One at the rider's feet & the other behind the Front Fender  , these strips give the options; Blue & White On , White Only,  Blue Only & Off  ... This Scooter is really blingin' in the parking yards now & even has folks taking cell phone pictures of it  ,... & it's a whole lot more visible on the roads at night ! 8) 

4
LIKE 200i / Re: Cellphone Charger Fuse Info , ... ?????
« on: January 19, 2016, 06:15:44 PM »
Thank you Sir , ...

    You've confirmed my worst fear , ... I"ll have to get started on that disassembly process , ... I may be in contact with you if I get stuck or have any more dumb questions , if that's okay  , ...    :-\


Bless ,

Marty

Rasta_scootah

5
LIKE 200i / Cellphone Charger Fuse Info , ... ?????
« on: January 17, 2016, 03:14:02 AM »
I've created a small trouble for myself while installing some small LEDs into my scoot's glove compartment door , ... I planned to use the cell phone charging port as a 12v power supply, but it seems I blew the fuse in my attempt to do so , ...  :o Where's the fuse for that cellphone charger ? Fuse rating & so forth , ... ???

I'll post photos of the finished project , ...   8)   Thank you !! Bless ... 

6
LIKE 200i / High Mileage Like 200s , ... ???
« on: December 14, 2015, 10:15:55 AM »
I bought my Like 200i used last January when we moved to Texas for $1700. , ... it had 700 miles on it ... I just changed the oil on it again at 5,600 miles , ( oil change every 600 miles ) and was wondering if anyone has one of these bikes with a whole lotta miles on it ...  ::)

7
LIKE 200i / Re: Dismantling my Like 200i
« on: July 01, 2015, 11:12:30 PM »
;) Yea, Lights ... , ...

8
LIKE 200i / Re: Dismantling my Like 200i
« on: July 01, 2015, 09:04:35 PM »
:o Oh ! I was trying to pry off the inside Leg Shield & it wouldn't budge !  The front one was stuck on tight too .. ! I was about to give up put it back together & go for a ride , ... How do you pry off that Front Shield ??

9
LIKE 200i / Dismantling my Like 200i
« on: July 01, 2015, 05:36:12 PM »
:) Hey Guys , I'm taking the front inside leg shield apart on my Like 200i in order to install maybe 4 bright blue LED Lights , and replace the original incandescent front maker bulbs also with an LED ... I've gotten all the screws out from the white and black colored parts and even removed the floorboard bolts , but , something seems to still be holding things in place ... " HELP !! "   
What am I missing here ??

Arrows in the photo mark where I intend to drill and place 3/4" Blue LED Lights ...

10
LIKE 200i / Re: Check Engine Light
« on: April 10, 2015, 10:49:23 PM »
I get 1 long flash followed by 6 short flashes as a code  :o   So Isn't that Code # 16 ?
Check Engine Temperature Switch , ...

11
LIKE 200i / Re: Check Engine Light
« on: April 10, 2015, 06:58:37 PM »
How would you go about fixing it if it was your bike ??  What should I say to the Kymco Dealer here ?

12
LIKE 200i / Re: Check Engine Light
« on: April 09, 2015, 04:23:51 AM »
Here in Texas , the State requires an annual motor vehicle inspection , - a shop inspection , ... ( I am due in April ) , ... My local dealer in Waco ,  has the diagnostic tool , ... I also have a front fork seal leak that needs to be addressed by them ...

Anyhow  , ...  I am used to getting on a Yamaha Zuma 125 scooter and regularly going 50 - 55 - 68 mph without the thing complaining about my fat Irish Ass & so on , ... So we will see about remaining in the Kymco Camp , ...  ::) :D

13
LIKE 200i / Check Engine Light
« on: April 08, 2015, 10:35:08 PM »
A few times now the check engine light has come on , sometimes it will stay on ... I get the code : PO115 Check ETS & wires & such  .... Where is that thing , ...??  This usually happens after periods of WOT riding ... ( I still haven't located the "Turbo Switch" on this scooter ) ,  ... :-\

14
LIKE 200i / Re: New Kymco Rider in Central Texas !
« on: April 06, 2015, 09:24:51 AM »
Here's some video I made up north riding my 2009 Yamaha Zuma 125 , ...  8)





Cold weather riding , in the name of beer !

15
LIKE 200i / New Kymco Rider in Central Texas !
« on: April 01, 2015, 05:37:54 PM »
Hi Guys ( & Girls ) , ...

     I recently bought a 2012 Kymco Like 200i with 700 miles from older folks for $ 1700 ... I thought it was a good deal considering Kymco's reputation, even though it had the original oil in the engine and the warranty had expired ...   :-\

     I have had a lot of riding experience on Taiwanese Scooters since I had owned and ridden a 2009 Yamaha Zuma 125 , 32,000 miles ... At the same time I had & rode a 2006 Honda Reflex NS250 about 10,000 miles , ... Sadly, I sold these bikes off before we moved to Texas ...    :o

     I had been doing my own maintenance & mods on those bikes & was a member of the Zumaforums website which was very helpful to me over the years for ideas, advice , used original parts and so on ... Guys who modified their scooters were a good source of gently used OEM parts ...

     I live in Temple, Tx , ... the nearest Kymco Dealer is in Waco, 38 miles down the road ( many miles of which is 75 mph speed limit ) ( Welcome to Texas, Y'all !!! ) ...

     The first service of my Like 200i was done near where I bought it in the Fort Worth Area @ 700 miles @ a Kymco Dealer in Burleson, Tx , ... They changed out the original oil & rear gear ( or final drive oil ) ... I have since changed the engine oil again @ 1,500 miles ...

     I'd like some advice from you guys, ... ; How do I open up the headlight for bulb replacement or cleaning ? And , how to open up the front running lights as I want to change them out with brighter LEDs AND does anyone know which LEDs are best for  this application ? ( I saw a bike for sale in Florida on this forum that had the LEDs I want ...) ... And have tried to contact JuanJax about those LEDs ...

     Also need to know OEM variator roller weight specs & recommended upgrade replacement clutch spring specs , ...

     Well, that's probably enough for now , thanks & Bless Up !

Pages: [1] 2