Author Topic: Getting to the valves on the 200 like and spark plug  (Read 873 times)

jcatanz740

  • Newbie
  • *
  • Posts: 5
    • View Profile
Getting to the valves on the 200 like and spark plug
« on: October 26, 2013, 01:15:08 AM »
I tryed to take off the panel where the valve an spark plug are  2 screws an the battery cover came off but could not pull the panel off is there another clip  or some tab that hold it in?

big blue

  • Hero Member
  • *****
  • Posts: 1183
    • View Profile
Re: Getting to the valves on the 200 like and spark plug
« Reply #1 on: October 26, 2013, 02:50:07 AM »
Take a look at the video on Youtube titled Kymco  Like200i valve adjustment. It will answer all your questions.
2012 Kymco Like 200i LX (Sold)  Salem, Oregon USA

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14578
  • Rural Ohio
    • View Profile
Re: Getting to the valves on the 200 like and spark plug
« Reply #2 on: October 26, 2013, 12:33:05 PM »
I tryed to take off the panel where the valve an spark plug are  2 screws an the battery cover came off but could not pull the panel off is there another clip  or some tab that hold it in?
Do remove the under-seat bucket and you can work from inside and out to get that center panel off. It is a bit of work to get that panel to unclip the first few times, just take your time and be careful, it will come off! With the seat bucket off you can see what is clipped to what..............the frist time or two I used a butter knife to help things along.
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

An Error Has Occurred!

Call to undefined function split()