Author Topic: My ZX50 barely gets to 30  (Read 4494 times)

naughty lee

  • Full Member
  • ***
  • Posts: 203
  • 64 mph and pushing
    • View Profile
Re: My ZX50 barely gets to 30
« Reply #15 on: January 16, 2014, 08:44:13 AM »
Or you could refit the original barrel and head with new gaskets. BBKs are not the answer to everything, I can get the standard bike to hit over 50mph without spending any money

245luigi

  • Sr. Member
  • ****
  • Posts: 334
  • Boston, MA
    • View Profile
Re: My ZX50 barely gets to 30
« Reply #16 on: January 16, 2014, 12:24:28 PM »
Naughty lee,

Mind making a "dummies guide to making a 50cc have wings"? I think it would be a great resource for the forum
Currently:
2012 Kymco Like70
72cc Malossi BBK
Dell'Orto PHBG 19 AS Carb
52 Pilot Jet
92 Main Jet
W7 Needle, 40 Slide
2T atomizer + bushing
Tecnigas Triops
Malossi Torque Driver

naughty lee

  • Full Member
  • ***
  • Posts: 203
  • 64 mph and pushing
    • View Profile
Re: My ZX50 barely gets to 30
« Reply #17 on: January 25, 2014, 03:28:40 PM »
Naughty lee,

Mind making a "dummies guide to making a 50cc have wings"? I think it would be a great resource for the forum

Its already on here, tuning 49cc mopeds takes time, especially when you are new to bikes. I'm 42 and I've  been riding a lot of years now, so I know a few tricks. Some tricks are free and some are expensive.
So , very quickly... Remove any restrictive washers in the pipe, clean and gap your plug, lift the back wheel off the ground and set your mixture to achieve max revs, splice the green cable on the ecu, and finally, skim the variator boss down to 34 mm on the side of a bench grinding wheel.
It ll do 50, my sons does 50 without the splice mod

An Error Has Occurred!

Call to undefined function split()