« previous next »
Pages: [1]

Author Topic: Replacing 0.8A fuse on 12v charger  (Read 1288 times)

Groversmith

  • Newbie
  • *
  • Posts: 26
    • View Profile
Replacing 0.8A fuse on 12v charger
« on: August 19, 2014, 11:41:28 PM »
I think I blew the fuse to the glovebox charger, since it's not working and there are no other electrical issues. I heard that its inside the front cowl. Does anyone have instructions/pix of how to change it out and probably upgrade.
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Replacing 0.8A fuse on 12v charger
« Reply #1 on: August 20, 2014, 02:02:21 AM »
Never had to, you can possibly pop the 12v socket out and get it. While your in there replace it with a slightly higher amp fuse.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

bluesin

  • Hero Member
  • *****
  • Posts: 1028
  • 2012 DT 300i
    • View Profile
Re: Replacing 0.8A fuse on 12v charger
« Reply #2 on: August 20, 2014, 01:04:33 PM »
I would guess you have to remove the Cowl asI did on my DT 300 .

I put a (Radio Shack ) 3 amp fuse in. The fuse is a SHORT (and NOT a Blade 0 fuse . I think Radio Shack is the only place to find them.

The .08 is pretty much useless if you want to use the outlet. I can run my GPS without worrying about blowing fuse , now .
Logged
"There is a Fifth Dimension beyond which is known to Man. It is a Dimension as vast as Space and as timeless as Infinity......It is an area which we call 'The Twilight Zone' .   "Rod Serling

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Replacing 0.8A fuse on 12v charger
« Reply #3 on: August 20, 2014, 08:33:30 PM »
Somebody on this forum put a fuse holder in near the receptacle on his DT300i which makes great sense. He even had a picture of the result.

And yes, the front cowl has to come off to get at that fuse. I remember seeing it when I put the 'Wolo' horn on my wife's scoot. I don't recall noticing if you can remove the socket from inside the glove box.

Karl
« Last Edit: August 20, 2014, 08:36:55 PM by CROSSBOLT »
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: Replacing 0.8A fuse on 12v charger
« Reply #4 on: August 21, 2014, 03:37:10 PM »
  they are called  dash mounted fuse holder I picked mine up at a elec. supply shop,.  drill hole and install ,. and then you can change fuse any time  I put mine about 1 inch from plug, front or back of plug OK.
Logged

An Error Has Occurred!

Call to undefined function split()
Back