Author Topic: How many enjoy DIYing your scoot?  (Read 1066 times)

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14693
  • Rural Ohio
    • View Profile
How many enjoy DIYing your scoot?
« on: May 17, 2015, 01:53:14 PM »
I really enjoy servicing my LIKE200i - I find it very good therapy to get a cup of Joe and the tools out on a TV table and check things under the seat bucket.
My favorite is a valve adjustment or a belt/slider change.  On the LIKE200i these are pretty easy procedures - with just enough tools and/or parts involved that you feel you've accomplished something technical & useful - with minimal chance of screwing things up if you take your time.
Deglazing the ol' clutch pads or setting the valves to spec just makes you & your scoot feel better, together.

Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: How many enjoy DIYing your scoot?
« Reply #1 on: May 17, 2015, 02:14:07 PM »
Me, too, Stig. Really like doing my own stuff. Rather ride but most work would not trust to any shop. I see you have been cleaning again with the tooth brush and Qtips!

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

demeter

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: How many enjoy DIYing your scoot?
« Reply #2 on: May 17, 2015, 03:17:31 PM »
I do too.

You could eat off that thing! Time for me to get scrubbing. :)
2010 Like 50 2T (Malossi 70cc BBK, Tecnigas Next-R, Blue Polini Torque Spring, Yellow Clutch Springs, 5.5g Sliders, Stock Carb: 95 MJ, Stock Airbox Drilled, PIAA GT-X Headlight, Kolite 5630 Running Lights, 140/70-12 Rear Tire)

0BARK4322

  • Hero Member
  • *****
  • Posts: 785
    • View Profile
Re: How many enjoy DIYing your scoot?
« Reply #3 on: May 17, 2015, 03:35:08 PM »
Are you using a degreaser or you have a new scoot
ALL STOCK

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: How many enjoy DIYing your scoot?
« Reply #4 on: May 17, 2015, 04:36:41 PM »
Working on your own machine is like therapy. Also you KNOW it's done right, some shops are baddddd you have no idea what I see done to scooters sometimes.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

big blue

  • Hero Member
  • *****
  • Posts: 1183
    • View Profile
Re: How many enjoy DIYing your scoot?
« Reply #5 on: May 17, 2015, 05:11:36 PM »
I have always done at least maintenance work on my machines and the Like is especially easy to service. Since all my previous bikes were motorcycles so I had to get used to removing bodywork.  You must just take care not to break tabs and go slow.  ;)
« Last Edit: May 17, 2015, 05:13:16 PM by big blue »
2012 Kymco Like 200i LX (Sold)  Salem, Oregon USA

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14693
  • Rural Ohio
    • View Profile
Re: How many enjoy DIYing your scoot?
« Reply #6 on: May 17, 2015, 07:08:31 PM »
 ;)
Are you using a degreaser or you have a new scoot
The secret to cleanliness is keeping your finger in the spark plug hole --- like this.
Stig  ;)
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

An Error Has Occurred!

Call to undefined function split()