Author Topic: mxu 250 overheating!  (Read 1357 times)

bism45

  • Newbie
  • *
  • Posts: 16
    • View Profile
mxu 250 overheating!
« on: July 13, 2015, 09:37:24 PM »
hi all, i run a quad tour business in spain and this year is hotter than ever!! a few of my bikes (all mxu 250) have started to cut out when hot, then start again when they have cooled down, my question is.....is it a problem with the fuel or something when they are so hot ? or is there actually a cut out switch built in that stops them when they are really hot ? strange thing is the temp gauge on the display doesn't show them overheating ? can anyone help please ?.....cheers in advance :)

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: mxu 250 overheating!
« Reply #1 on: July 13, 2015, 10:50:05 PM »
Sounds more like vapor lock in the gas tanks. I know nothing of the Kymco 4x4's. When they stall open the gas cap, if it "hisses" you have to vent the tank somehow. If they have plastic gas caps, just drill a very tiny hole in the top of it and the vapor lock will stop.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

bism45

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: mxu 250 overheating!
« Reply #2 on: July 14, 2015, 01:24:00 PM »
they all have hholes and hoses in the tanks to release any vapour ??

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: mxu 250 overheating!
« Reply #3 on: July 14, 2015, 02:47:54 PM »
they all have hholes and hoses in the tanks to release any vapour ??

Not to sure then, i only know about scooters.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

An Error Has Occurred!

Call to undefined function split()